LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 87 Results
  1. Projects Tool Storage Cabinet

    I hate an unorganized shop, and my metal shelving unit became a catch-all for anything and everything. So, it was time to change it up and add a more custom shop tool storage cabinet. The shelves of the cabinet rest on heavy-duty pins, so reorganizing or if I get some new tools, I can change the...
  2. Projects Router Table Upgrade

    It was about time I switched to a router table from the one I built into my workbench years ago. And one of the first things I wanted to do was add some much needed storage. Nothing better than having all of your tools and bits nearby when you need them. For the build, I used birch plywood and...
  3. Shop organization

    These are two shop organization projects I've done. The cordless tool board is something I dreamed up to use scraps and get the drills, impact driver, saw and light off the bench. By the way, I can't say enough about my Panasonic cordless tools - much better than the Dewalt they replaced. The...
  4. Ultimate Clamp Rack

    Hey, guys! I built the Ultimate Clamp Rack for JET & Powermatic Woodworking. I live in Nashville and the JET/Powermatic training facility is just 30 minutes east in Lavergne, TN. I made this clamp rack to hold 36 JET parallel clamps for their shop and it only takes up 43" of wall space. The...
  5. Scroll Saw Blade Organizer

    Here is something I worked up a while back to hold our scroll saw blades… The top is a 1x and the bottom is a 2x pine with 1/4" plywood sides. I drilled the top and bottom at the same time by using double sided tape to hold them together while I drilled the holes…
  6. Pegboard Tool Stand

    At the theme park job I had over the summer I had to build a pegboard stand for some 'weapons' in one of the park's Halloween mazes. That weekend I told my kid about the stand and he mentioned, "Dad, I've never seen a rack like that, with all the tools in place on hooks." Duh! The light...
  7. Coated Abrasive Belt Storage Labeling

    We needed to identify the grits of belts hanging near ceiling on split plastic pipe mounted to shelf supports. Our solution was using wooden blocks. First we band sawed each block from a 2×4 and then sanded to fit inside of each 3" diameter half pipe. Each block was screwed to a pipe. This...
  8. Ladder storage

    I needed some place in my crowded garage to store my stepladders. So I looked above my garage doors and thought that space is wasted. So I measured and found out that my ladders would store there. I took 4" strips of plywood for the 8' ladder and 2' strips for the 6'. I used cutoff 2×4's...
  9. axe with stump

    mahogany and oak axe with yellow buckeye stump, approximately 2" long axe total height approximately 3"
  10. Table Saw Storage Cabinet

    Hey guys! I just added some much needed storage to my shop with this Table Saw Storage Cabinet. It goes under the right wing of my table saw and holds all my blades, accessories and even jigs. The two sides have vertical sliding panels in them which house my most used items like blade change...
  11. Shop Base Cabinet with Drawers

    I built this 5' wide base cabinet for some extra shop storage. It has 4 pull out trays, 2 behind a door on each side, and 3 drawers in the middle. I made the whole base and shelves from 2 sheets of 3/4" plywood and one sheet of 1/4" for the drawer bottoms. I used a portion of a 3rd sheet for...
  12. Miter Station Cabinet #2

    This is the 2nd of 2 cabinets that I built to utilize the ridiculous amount of wasted space (picture 5) below the fold up wings of my repurposed tv cabinet miter saw station. The first cabinet that I built is a router table with a flip up lid and tons of storage. That project is in my project...
  13. Shop Storage

    I have a lot of screws and hardware that I have accumulated in my shop and I wanted some drawers for tool storage. I put these together. Not perfect but they do the trick. 10 sheets of 3/4" and 5 sheets of 1/2". I used the cheaper plywood from the box stores. Didn't pony up the money for...
  14. Quick Hanging Drill Cabinet

    I recently bought my first impact driver and wanted a good way to hang it over my workbench. I saw some of these online and figured I could probably handle that. It was a full "winging it" style project that I made up the dimensions and plan for as I went, but it works perfectly for what I need...
  15. Additional Shop Storage

    Some time spent in the shop this week helped me to straighten up a bit more. The first 3 pics are of my lathe work area or formally lack there of, the lathe bench was just piled with stuff. The lumber rack below the cabinet was made several months ago and also became very cluttered. The new...
  16. Miter saw station

    This is more storage and work space for my miter saw. This project is made with MDF, 1/2" plywood drawers, MDF drawer fronts and over extension drawer slides. I'm considering T-track in the work surface for a extended fence but haven't gotten ther yet. I just repainted the blue rolling cabinet...
  17. New shop storage cabinet

    The plans for this storage cabinet came from American Woodworker, entitled Giant Shop Cabinet. It not only can be used in a shop, but in a small kitchen for a pantry, or in a garage for vehicle cleaning supplies or where ever you need extra storage. It took me about a week to complete and that...
  18. Slant front Rolling Tool Cabinet with removable tool chest

    Just finished this, Slant front Tool Cabinet and Chest I Built it using 3/4" Maple plywood for cabinet cases , recycled Maple hardwood flooring for edging trim and drawer fronts. Drawers bodys are G1S plywood. The plans came from Shop Notes Magazine, Setting Up Shop issue. I found the plans...
  19. Clamp rack

    Trying to get my shop organized. Local place makes corn hole boards and sells the scraps (1' by 4' or 5') for a couple bucks each. Used my Kreg jig for the joinery. I see that I need to buy more clamps since I have the room for more. The only clamps on the rack are 3 longer bar clamps and my...
  20. Tool cabinet organizer

    This is my version the open storage divider rack cabinets that are seen in many workshops. Typically these are mounted on the wall and hold nail guns and drills for quick grab-and-go usage. I don't have room on my walls, but I still needed something similar as I got tired of all the fumbling...
1-20 of 87 Results
Top