LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Shop Built Air Filter

    I scored a free 4 speed furnace blower the other day and decided to build a much needed Shop Air Filter system. I found some plans at All it cost me was $30 for the 3/4 Birch plywood and a few hours of my time. Note: Thanks to LJ...
  2. Drill press table & fence

    This drill press table is made up of 2 layers of 3/4" MDF laminated with white Formica. I used the blue anodized t-track, hold downs and hardware from Rockler. Finished off the edges with some leftover scraps of Lyptus. I should have made one of these years ago!!!!
  3. Power Tools, Hardware and Accessories
    In my cabinet shop, we didn't use a jointer for a couple of reasons. First , we bought stock that was surfaced top and bottom, and straight-lined on one edge. If the selected board was decently straight, all we had to do was thickness plane the wood and join with pocket screws. And second it...
1-4 of 4 Results