LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 19 Results
  1. Sheet Goods Storage Cart on the fly

    Finally I decided that I need to organize better my sheet goods stock but on the other hand I did not want a storage cart that takes much space … Shop space is Precious !!! I build this cart in a day and it cost me nothing except the casters that I had to buy and the carriage bolts. Made out of...
  2. Lumber Rack

    The garage was in need of some organization, and one major improvement that was still to be made was an addition of a lumber rack for sheet goods as well as other stock and scraps. I got the general plan from a magazine full of shop jigs, racks, cabinets etc. It has greatly improved the...
  3. Panel Carrier & Dolly

    Panel Carrier & Dolly I have to admit that I'm not getting any younger so I need some helpers carrying sheet goods. Out of some old scrap cut offs of whatever I found in front of me I quickly made a Panel Carrier to bring the sheets from the car inside the shop and a Panel Dolly with a clamp at...
  4. table and chairs

    This is the table that goes with the chairs I posted a week ago.I had a lot of fun making these.I designed them but they are I would say a shaker-craftman style,if there is such a thing.I hope you all like them.
  5. Table Saw Dust Ducting

    Well this was my second project over the summer. It took about 2 weeks to do, and i learned a lot. If i had to sell it, it would be like over $2000. When i was done there was 249 rivets, ya 249. So in the viewing window i added one extra rivet just to round it out to 250. It works with an old...
  6. Quick and dirty sheet good carrier

    I have to carry some sheets (mostly OSB) with 250cm x 125cm. For the first sheets, I used the string method, but I didn't like it. So I looked around the web and came up with this sheet good carrier, which makes life much easier. At least for me.
  7. Wood Rack w/ Panel Saw

    Here we have my just finished wood Rack with Panel saw attached. I kinda got the idea for the rack from someone on here (a lady) and the wood whisper. I chose to use the 2×4 horizontal for space instead of vertical like the wood whisper, the lady did it this way. The Short supports come out...
  8. The Kerry-All Pouch

    a1Jim was asking about my pouches, so I thought I'd put a couple of pictures here. The whole idea started when I needed to pick up a sheet of oak plywood for a cabinet I was making for a customer. I had my trusty F-150, but alas, it was an extended cab with a 6 1/2 foot box and it was snowing...
  9. A-Frame Storage Rack

    A-Frame Storage rack made from CD-X plywood. 6' long, 2' wide and 4' tall. On rolling casters, but fully loaded those cheap casters don't roll. Lessons learned while building this project: BC plywood would have been a lot easier to work with and good casters are worth the extra money you...
  10. Treated lumber rocking chairs

    A co-worker asked me to build her two outdoor rockers for her new house. I built these mostly from shorts I had from a dock renovation so the lumber was air dried. All of the joinery is mortise and tennon and re-enforced with 2.5" screws. In addition the rockers are held on with 6" lags which...
  11. Woodworking Skill Share
    I am looking for input on which cutlist/layout program is good to get. I am looking for something rather cheep and if there is an adequate one out there for free that someone could recommend that would be even better.
  12. Power Tools, Hardware and Accessories
    I'm looking for individual components to put together a DC system for use on one machine at a time that will be able to pull chips from my portable thickness planer. Since I do my woodworking on my driveway, the system needs to be able roll out there. It also needs to fit in a 24" x 36"...
  13. Focus on the Workspace
    Earlier this year I was fortunate enough to be given some really nice laminated MDF. Like any reasonable person, I took as much as my car trailer could possibly hold. I stacked it in the middle of my garage (this makes my wife less than happy). Over the summer I have been pulling sheets for...
  14. Designing Woodworking Projects
    I am looking to build a shed. I have access to scaps and leftovers from a local outdoor theatre. I get a lot of 2×4s and a few pieces of 3/4 plywood. There is usually also many sheets of 1/8 or 1/4 inch luan or floor underlayment. My question is whether or not I could double up these sheets to...
  15. Power Tools, Hardware and Accessories
    Howdy folks, I was thinking of purchasing a little something to feed my wood working hobby with some of the money I got for X-mas. Having plenty of projects I want to do, but none of the power tools to do them all yet, I was thinking of keeping to the smaller projects for now and investing...
  16. Blogs
    Ezee-Feed I had been wanting one of Lee Jesberger's Ezee-Feeds ever since I first saw it. It looked like a great solution to the problem I was having getting a decent job of cutting sheet goods.Carleen and I fought the last cabinet job with a 4 roller stand and the new outfeed table I put on...
  17. Blogs
    Working with Melamine This is a re-edit of the video that got me started doing videos. Unfortunately I knew very little about shooting and editing video at the time. In fact, I shot the video with a web cam, so the video quality is poor in parts. The re-edit gives it a nice face lift, but...
  18. Blogs
    Optimal Cutting with minimum scrap - iPad app I recently finished working on a cutting algorithm app for the iPad and iPhone called Smart Cutter, and wanted to share the app with every one hoping get some feedback from carpenters and wood workers. Smart Cutter finds the maximum number of small...
  19. Sweating for Bucks Through Woodworking
    Well. I want to build an Armoire. This would be for a family member so I am not going to make any money off of it. I was adding up a list to see what the damage would be if I were to make it. All these calculations are estimates, save for the sheet goods. I am really shocked by the total...
1-19 of 19 Results
Top