LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 62 Results
  1. L-Square Stop & Depth Gauge

    L-square Stop - Depth Gauge - Table Saw Setup Tool I designed and built my L-square edge stop around 1984, when I became frustrated with using stops for setting up stair steps for the process. I wanted one which was quick to install and easy to use (e.g., moved smoothly along the edge). The...
  2. Redwood Burl Mini Bowl

    This bowl is about 3 inches wide
  3. Headphones Stand

    This is one of my first steps into woodworking. I made this headphones holder as a step on my gaming setup build. Its all made of reclaimed wood and hold together using joinery. You can see the full video of me building them in my youtube woodworking channel Im portuguese so the video is in...
  4. Kreg Jig Portable Workstation

    The Kreg Jig is mounted to a small board which nests in the workstation. This workstation gives support to your wood as you work. It contains five storage compartments behind three sliding doors. These compartment store screws, bits, drills, clamps, and the jig itself. It can also house the Kreg...
  5. deer horn knife

    This knife was made from an old machinest file. I made it with the grinder that I made posted on this site. Everything is made totaly by hand. Thought you all would like to see it. More to come. The glass sign was made by my brother. The celtic owel is my knife logo that will be etched into the...
  6. Playhouse

    There is a soft spot in every man's heart for his daughter and mine came a week after my 50th birthday, my first and only child. I knew she would have many toys, trinkets and games from me, a woodworker who loved his craft and loved her; so when she came of an age that imaginative play kicked...
  7. End Tables

    These tables are based on the ones on the cover of Tables by Anthony Guidice. I love the simplicity of the design. The tables featured Dovetailed Mortise and Tenon, which came out great, but I wouldn't say the same for the drawer dovetail work! The legs are actually recoverd Tulip Poplar from...
  8. Simple Joint Box + Box Joint Jig

    Yesterday I finished my first Jig, ( Box Joint Jig) (see attached pictures) still need a couple of minor tune ups that I didn't realized untill I started cutting the joint fingers of my first box ever. I did use some scrap of red oak that was on my garage for a couple of years, it measure 5 1/2"...
  9. Gerstner Style Tool Chest

    I made this tool chest for my oldest son, to mimic an old Gerstner chest that I once saw at an antique store. I think I spent more time figuring the dimensions of all the pieces and how they interact with each other, than I did actually putting the wood to the tools. It's made out of quarter...
  10. The Golden Slipper

    Every year, I donate a "work of heart" to a local charity to silent auction. I also wanted to find a piece of wood that has a knot in it so I could compete in the winter contest. The base of this box is cherry. The lid is purple heart, ebony and osage orange. As usual, I began carving with the...
  11. Salt & Shorty

    A couple of small carvings inspired by another wood carver. Thanks for looking.
  12. Nightstand Drawers/Valet

    Wanted to build something small with some pine I had sitting around in the shop. Figured I could use a nice small place to put my keys and wallet etc at the end of the day. All pine except for the drawer bottoms which are leftover cherry ply. Finished with green milk paint and wax. Pulls...
  13. Jaqs dart board cabinet

    My son is a big Jaquar's fan so I made this dart board cabinet for him. Might be a copyright issue in there somewhere, so please don't tell.
  14. Power Tools, Hardware and Accessories
    Just a little advice being saught here: I just purchased a Delta Fence for my Craftsman TS. After getting everything out of the box, I've noticed the holes for the bolts don't line up. So, I'm obviously going to have to do some major modifications. Should I drill new holes through the edge...
  15. Hand Tools
    I am curious what needs to be done to setup a new Veritas Bench Plane? I've been seriously contemplating purchasing a Veritas #5 1/4 bench plane. I feel perhaps this would be a great all around plane to start with for smoothing and prep work. (Please correct me if I am wrong on this). I do own...
  16. Power Tools, Hardware and Accessories
    Hello, I've just kindly been given a whole bunch of woodworking machines by a man who has retired from the trade. One of those tools, a Dewalt DW 1201 has left me puzzled. I'm a cabinet makers apprentice of about 6 months so my knowledge is very limited on the setup of this machine although I...
  17. Power Tools, Hardware and Accessories
    I found a 8" grizzly jointer on Craigslist. The next day, drive about an hour and ten minutes and pull up to this guys hideaway with pole barns, old wooden barns and all kinds of stuff. I see an old trailer with about 6 Grizzly tools on it, a shaper, big bandsaw, dust collector, big lathe, big...
  18. Power Tools, Hardware and Accessories
    Hi LJs! I'm a new member who found this site while researching table saws for my new (basement) shop and got addicted very quickly. I'm looking for some advice on where/what to spend my initial funds on. [I know this is a very open ended question and that opinions vary so I have included some...
  19. Power Tools, Hardware and Accessories
    Hello LJs, I am new to woodworking and recently purchased a Grizzly 0555LANV, the 14" Anniversary Edition. This is the first bandsaw I have ever setup, so I have been slow to get it going. I had to wait for dry weather to shellac the table, but that is finally done. Today I have made progress...
  20. Power Tools, Hardware and Accessories
    Hey all! I've just put together a Grizzly G0490W - 8" Jointer with Parallelogram Beds and started to check/ set up the beds before using it. How accurate do you guys set this up before it's acceptable to use? I'm using "this 50 straight edge and started by checking the individual beds with...
1-20 of 62 Results
Top