LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 418 Results
  1. Projects Scrollsaw work

    I download a couple of Steve Good patterns, the first is the nativity cross. I printed it out and for some reason it was much smaller than it should have been . I looked at it and said what the heck, I will cut it anyway, I also printed the pattern the correct size and cut that one also. The...
  2. Projects Holiday nativity items

    I made a couple of Steve Good nativity item for the holidays. The first is a Nativity Illumniary. All the material is 1/4", I resawed a bunch of maple and poplar, cut to the correct size on the tablesaw. Each side is a different pattern so I stack cut 3 at a time, hence three boxes. The plans...
  3. Baskets

    I made a few baskets using a Steve Good pattern from a bunch of scrap I had laying around. After I cut the first (large) one I ran the waste peice thru my drum sander to make it a bit thinner and made the next basket 80% , then did the same thing at 60%. I should have actually measured the top...
  4. Chicken Ornaments

    It is once again time for the Christmas Ornament Challenge by youtubers Alan Stratton and Carl Jacobson. I made these chicken ornaments to poke a little fun at Peter Brown for not entering last year's Christmas Ornament Challenge and to encourage him to enter this years contest. If you...
  5. Père Noêl

    Hello This is my last project for Christmas Bye
  6. 2016 Christmas Ornaments

    My annual Christmas ornaments. Made these from a pattern from Steve Good. 1/4" Cherry.
  7. Deathly Hallows Poster

    Frame is from Oak, the scrollsaw work is in Jaktoba. Covered with an acrylic layer so her kids won't accidentally destroy the delicate parts. So my daughters both love the Harry Potter series of books. One of them has numerous movie memorabilia and I thought she would like a unique addition to...
  8. Sports

    Hello Another scrollsaw work around sport Bye
  9. Noteboard

    Another Christmas gift! Son-in-law is a big Seahawks fan so I needed to figure out some sort of Seahawks imagery into his present. Finally decided on this note/message board. The Seahawks logo is scroll-sawed from Basswood and the Frame is Oak. Not the most difficult project but it was nice...
  10. Scorpion

    Hello I've sawed this sorpion with my scrollsaw It is'nt dangerous Bye
  11. M.C. Escher Image Jigsaw Puzzle

    This puzzle is FINALLY finished - I started on this around a year ago and just finished it a few days back. Not that this SHOULD have taken that long, but I always had "something better to do". I think we all have projects like this, right? First off, thanks go to Adrian Iredale for the idea...
  12. Party Candle Holder

    This is a Project that I done awhile back as well. I call it a party Candle holder, I'm not sure the orginial Name of this project, The orginal Design is from Steve Good At The Scroll Saw workshop, so All Credit goes to him. I enjoyed the Small Table i thought I would Cut it out myself. Tech...
  13. Scrollsawn Dinosaur Collection

    After getting feedback from those who were interested in my dinosaur puzzle posted last month, the input suggested that I needed to simplify the collection to allow younger children to enjoy these dinosaurs. So, except for the palm trees, I cut the figures out without making the jigsaw pieces...
  14. Hat Display Shelf

    This was my first real attempt at making something somewhat nice out of wood. I am obsessed with hats from a company called Gongshow. They make hockey lifestyle apparel. I have so many hats that the closet was getting out of control and I wanted to put my favorite ones on display. The bulk...
  15. Covered Bridge

    Hi ,this is a project I did in 2006, It is one of my personal photos(I enjoy taking my own photo and designing them into patterns). Designing this pattern was fun because of all the trees and how I was going to make my cuts. I made it one cut on the trees to the right (first challenge)the...
  16. Medallion Ornaments

    These are a couple of Christmas ornaments that I built made over the last couple weeks. The first four pictures show an ornament I built for youtuber Peter Brown and entered into the Christmas Ornament Challenge hosted by youtubers Alan Stratton and Carl Jacobson. I made these from wlalnut and...
  17. Horse

    This is one of the first scrollsaw pieces I entered in a contest. I got the pattern out of a scrollsaw magazine. As you can see I won a blue ribbon.
  18. Scroll saw cat coaster

    Hello I'm beginning my adventure with scrollworking. I've made some simple projects before but this one is the first that I can show to someone else beside my wife :) The cat is made from plywood.
  19. Candle Holders

    All the candle holders are created using the scrollsaw and patterns purchased from Sheila Landry (scrollgirl). The first three are made from 1/2" hickory, the 4th holder is 1/2" aromatic cedar, and the last holder is 1/2" poplar. All the holders have been finished with Danish Oil and they are...
  20. Scroll Saw Blade Holder

    I needed a good way to sort and store my new and used scrollsaw blades so this is what I came up with. I had some scrap butcher block counter top that I used for the base. It is nice and heavy so it is not prone to tipping. The tubes are PVC set in holes drilled with a forstner bit. I labeled...
1-20 of 418 Results
Top