Search Results for ‘scms’

Sliding Compound Miter Saw (SCMS) Station An inexpensive but very functional SCMS station made from scrap wood and a give-away conference table. My SCMS station is not fine art furniture but it works as good. Its design was determent from what I had available in the shop. The table is a...

needed to give a maid in my conrespondençia and decided to make a card holder made of cream colored melamine mdf hope you like this design

My son converted a small room between his garage and his kitchen into his Mud room. He asked me to also design 3 custom benches that fit into the mud room. Since they are painted white, I used lower cost pine to make the benches. I used 3/8" dowel construction for the bench end pieces, then...

I rearranged the shop and decided to upgrade my SCMS DC hood (from my old trash can solution). Design objectives were: 1. Easily removable, so the saw is still portable. Two 1/4-20 wing carriage bolts with wing nusts detach hood. 2. Light weight, so as to not make the fold up stand tippy. 3...

Just finished my latest tool cabinet. I am fairly new to hand tools, and I set out to cut all of the joinery for this cabinet with hand tools. I found the cherry for the carcass to be very unforgiving when cutting through dovetails by hand, so I switched to box joints on the table saw for the...

jig

Santa making rounds early this year Notice zero clearance insert-big help lineing up fence

Another one of the Cypress Tree trunk slab coffee tables. This one has a darker varnish base, and the trunk base is from a root section of the trunk. See the table on Imagina Natural

I just finished this table saw sled. I thought the stop was a good addition. I got the plans from the internet. I made a few changes in the size.

Wife dropped off a couple of cabinets she found at a flea market and requested that they get sanded and painted and a top so she can redo the mail/bill station at the house. Printer cart, shelving, and cubbies to come Cherry with Sycamore accents

You may have seen this style SCMS stand b4…. the nexus for the plan comes from 2010 issue of FWW. I altered the design in a couple ways, as I thought the Kreg stop system was way overpriced and I wanted to use the base for storage of cut-offs. I also re-sized the box for better plywood...

Long story shortened a little, I recently lost the use of my neighbor's Bosch SCMS. He kept it in my shop for 3 years before he ended up taking it back for a project and as I figured it has found it's permanent home in his basement. I missed that saw!! So I bought a new Jet SCMS and I'd been...

Finally I did found a space good enough for my needs and settled down to set-up my small workshop. The total space is 70m2 or about 750ft2. So I set it up keeping the cost at the minimum and used allot of wood pieces I found here and there. Anyway I am not the type of woodworker who likes fine...