LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Saw blade till

    Here is my new Saw blade till. Oak with hardboard trays that slide in slots. The handles are dowels that are dyed with a red aniline dye and stopped brass bail handles on the
  2. Improved and Compact Saw Till with No Balls •

    Dec. 26, 2010 After seeing SWIRT's Saw Rack with Balls I decided that I needed to try and make one. However, I needed mine to be more compact and smaller. So here is how I made my Saw Till out of scraps. It starts with the BODY of the saw till that uses a scrap piece of 2 X 4. I cut a piece...
  3. Saw Station Completed... kinda

    I have pretty much gotten this thing to where it will be when its 100% complete (basically drawer pulls and finishing touches). I always feel like I am never done with a project cause Im always trying to improve something. My wife jokes with me and says that its the neverending project cause I...
  4. Saw Till

    Finally finished my saw till. I've been picking up vintage saws on eBay and were beginning to clutter up my garage shop. I saw a similar version of this till online and thought I would make myself one. It's made primarily from red oak and a mystery wood for the top brace, the saw rest and...
  5. French Cleat Hand Plane, Sandpaper, Saw, & Paper Towel Storage

    The first things I mounted on my new french cleat wall were my storage solutions for my hand planes, saws, sandpaper, and paper towels. I built these before my hiatus from woodworking and had them mounted around the shop on one-off cleats. Now, they have the honor of gracing the new wall...
  6. Campaign Saw Storage

    After reading Chris Schwarz's Campaign Furniture, I was inspired to build something in that style. We just didn't need any more furniture in our house. I have been struggling with what to do with my growing collection of handsaws and figured I would combine those ideas into a campaign saw nest...
  7. New saw till

    Hi guys! I wanted to share one of my latest projects. My new saw till. I gave myself a couple of challenges on this project. First I could only use the material I had " rescued " from the curb in my neighborhood. Therefore nothing but the glue and finish were bought for this project. Second...
  8. Power Tools, Hardware and Accessories
    I purchased a delta 36-725 10" table saw recently. The insert that came with the saw does not lay flush with the rest of the surface of the table saw. This creates issues when cutting wood. I do not see any adjusting screws to work with to make it flush. Has anybody out there seen this or...
  9. Finishing
    Hi all i am almost to the finishing stage of a large credenza I am building. The piece is primarily black walnut. I was going use the sanding slurry method to finish it off to seal the pores. I have had some success with this method in the past but on small projects. Could anyone offer any...
1-9 of 9 Results
Top