LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Saw Till with Balls version II

    A while back Swirt did a saw rack and it was simple. It used the french cleat method with makes it easy to move around or repair. Here is his project.. I had saws all over the place. The process is simple all you need is some scrap and a few dollar store bouncy balls. I layed out the...
  2. Improved and Compact Saw Till with No Balls •

    Dec. 26, 2010 After seeing SWIRT's Saw Rack with Balls I decided that I needed to try and make one. However, I needed mine to be more compact and smaller. So here is how I made my Saw Till out of scraps. It starts with the BODY of the saw till that uses a scrap piece of 2 X 4. I cut a piece...
  3. Razor Saw Rack - Oak (with help from daughter)

    First, I wish to thank fellow Lumberjocks Mafe and Tedstor for their most excellent chisel rack projects that I favorited and ultimately let influence this project greatly. Thanks, guys ! I have a fairly new collection of Zona razor saws that I wanted to have arranged and readily available for...
  4. Saw Rack has Balls

    I found the basic idea for this design as a tip in some woodworking magazine (and haven't been able to find it again. if you know where it came from please let me know) The design appeals to me because: a) It is magical b) It holds practically any saw c) I don't have to adjust my grip on the...
  5. Power Tools, Hardware and Accessories
    I purchased a delta 36-725 10" table saw recently. The insert that came with the saw does not lay flush with the rest of the surface of the table saw. This creates issues when cutting wood. I do not see any adjusting screws to work with to make it flush. Has anybody out there seen this or...
  6. Designing Woodworking Projects
    Hi, Does anyone have a pic or something that shows a material cut list sheet for some standard cabinets for the floor and wall? I can probably do it manually, but I thought maybe a fellow LJ might have one already handy. I'll be building some wall/floor cabinets (face frame) for my garage...
1-6 of 6 Results
Top