LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Benchtop Downdraft Sanding Table

    I put together this downdraft benchtop sanding table from some scraps I had laying around the shop from other projects. I started with a small pieces of ½" MDF, ½" ply, 1/8" pegboard and a leftover 45 degree PVC elbow. The size was somewhat determined by the scrap pieces, but the long MDF...
  2. overhead dust collection boom arm

    a little accessory to go with the new assembly table.ive really been trying to eliminate as much dust in the shop as possible and sanding dust is the worst so i built a boom arm to get the hose out of the way which is attached to an automatic dust collector.the hose is a shop vac hose attached...
  3. Blogs
    Equipment Before I will post some pictures of making spoke wheels, first a overview of the used equipment. I have written before over my Wabeco milling drilling stand. I hope the below overview will make some more clarity. But if it doesn't take a look at Wabeco PDF documentation. 6...
  4. Blogs
    The Circle/Radius Sanding Jig Here is an easy to make Sanding/Radius Jig to fit the Rigid oscillating spindle sander Model # EB44241. I'm building this jig out of re-purposed material, a handful of hardware and a drill press turned knob so the cost to make this jig is actually on a couple of...
1-6 of 6 Results
Top