LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. Maloof Inspired Rocking Chairs #3 & #4

    These two chairs were made for a retired Air Force Lt. Col. and wife. Both chairs are made with quarter-sawn oak and walnut. I like the way the flakes in the quarter-sawn oak turned out.
  2. Sam and Max Fridge Magnets

    Sam & Max Fridge Magnets Made from okume plywood. Hand painted with acrylics.
  3. New Heron Headcrest Maloof style rocker

    This Maloof style rocker is a project in work. I wanted to show the new Heron Head-Crest made using Claro Walnut and inlay-ed with glass. The rocker is in my 'Ranch' front leg style. Yet to be fully sanded and rubbed with finish materials. The HeadCrest is Claro Walnut natural edged on top. I...
  4. Sam Maloof Inspired Rocking Chair Kansas Black Walnut Sculpted Rocker Custom Sized Hand Shaped

    This project posting is of a Maloof-Inspired rocking chair that I shipped recently to the Washington DC area. If you would like to commission a custom built Rocker specifically sized to fit you, you can start the process by checking the base pricing by clicking here to go to my Etsy Store...
  5. Walnut Walking Cane, Tall Ball-Top Fancy Opera/Dress Cane

    ------------------------------ This walking cane has been "SOLD" (7-5-2010) Cane Serial Number: #2008-06 Height: 40" Welcome Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll find a list of canes that I have built...
  6. Maloof dining chair

    Good day, fellow LJ's. This is my attempt to copy Maloof's low back dining chair. I think I jumped on to big of a challange for my level of experience. The two months of making it, was a real struggle. I had to learn how to do this by trial and error. So, most of the time it was screwing...
  7. A Moving Sculpture: A Sam Maloof Inspired Rocker, A Rocking Chair by Mark DeCou

    This posting is of a Sam Maloof Inspired Rocking Chair that I built, my first one. This chair in the photos is "gone", but if you'd like a handmade rocking chair, please email me for more information email: [email protected] Click Here to See Rocking Chair #2 Click Here to See Rocking...
  8. Walnut side/Dinning chair, Maloof style

    This is my try at Sam Maloof's "Evans" Chair. I really like this chair; it is by far my favorite to set in. It fits my behind very well; I guess that makes sense considering it's the same behind I used to test the chair while shaping it. dayton www.daytonwooddesign.com
  9. A-Frame Side Chair in Walnut

    Another Maloof inspired, chair. dayton www.daytonwooddesign.com
  10. A Sam Maloof Inspired Rocking Chair; Walnut Rocker #3 by Mark A. DeCou

    This was a commissioned project, and has been sold. This first photo, I had in my mind that Andrew Wyeth painting of the girl laying in the grass of the hill. Remember that iconic painting? That's sort of what I was trying for with the first photo. Did I caputure it? Click Here to See...
  11. A Sam Maloof Inspired Rocking Chair; Walnut Rocker #2 by Mark A. DeCou

    Thanks for visiting. This chair is my 2nd Maloof-Inspired rocker. Here are photos of the 1st Rocking Chair Here are photos of the 3rd Rocking Chair Here are photos of the 4th Rocking Chair ---------------------------------- Photo 1: Photo 2: Photo 3: Photo 4: Photo 5: Photo 6...
  12. Sam maloof inspired outdoor cedar pedstool table

    This table was built using 2'' eastern white cedar, staing with japanese maple and jacobean to match the customers chairs, the chairs in the picture are mine and do not reflect to same colour. I used 2 3'' screws at all the end grain joints, with tite bond 3 glues used at all joints. I used...
  13. sculpted walnut high chair

    Modern/ Maloof Style high Chair in Walnut. This is the most recent incarnation of my High chair design, it's basically the same as the others I've built but I've widened the footprint a bit to make it a little more stable. The majority of the shaping is done with a band saw, 5" grinder and...
  14. Power Tools, Hardware and Accessories
    I just got a HF 14" bandsaw based partly on the reviews here . . . decent bang for the buck since it was on sale and, of course, I was armed with my 20% off coupon. I want to get a Wood Slicer resaw blade which I figure is a good upgrade for $30 (there goes 1/2 my 20% discount!). The HF...
  15. Blogs
    An introduction Since I already blog at my own domain I did not want to duplicate all of that content here at LumberJocks each time that I made a post. So, I asked Martin if it was appropriate for me to have blog entries here at LumberJocks that link to my own blog. The answer was a...
    20-degree band saw jig angle grinder apron article arts arts and crafts asian attaching the back band saw bandsaw bent lamination bevel cut binding block bosch colt bowl boxes build cabriole cabriole leg cabriole legs cherry chisel clamp clamping construction coopering cove cutting cove cutting jig crafts craftsmans curly design design limitations design process domino dovetail saw dovetailed drawer dovetailing dreadnaught guitar dreadnought guitar drill edge jointing festool finishing fixture function furniture furniture design gene landon glue up gluing go-bar deck graham blackburn guitar hal taylor hal taylor rocking chair hand hand plane hand rubbed finish hand tools headrest inlay jig jigsaw joining jointer jointr kelly kutzall shaping disk lathe legacy loose loose tenons lumber lutherie maloof maloof chair maloof joint maloof rocking chair maple mehler milling modern shaker table modern shaker tale mortise path plane poll power power tools press project progress proportion purfling queen anne queen anne side table refurbishing rough router router jigs router mortise router mortise jg routing routing inlay channels sam sam malof sam maloof sam maloof rocking chair sanding scraping sculpted rocking chair sculpting seat shaping shaker shaping sharpening side table skill smoothing plane string inlay stringing table table saw thin strip ripping tablesaw tablesaw tapering jig tapered legs template routing tenon thomas pafk three pillars of design tools traditional trammel turning tutorial upgrade veneering walnut wendell castle woodturning woodworker woodworking workbench workshop
  16. Blogs
    Its on! After reading Maloof's book last summer, I ordered the DVD and templates from Scott Morrison, claiming the lowback to be my "winter project". Now its (actually "they" as I'm making a pair) on the way as I officially have completed the first few steps: Glued the templates on plywood...
  17. Blogs
    Sam Maloof style rocking chair Class How to build a Custom Sculptured rocking chair Lesson # 1 Here is the free class text you wanted. It is complete and you can build a rocker using it. If you are following along with the Web Class and are anxious to upload the new text before I am...
  18. Blogs
    Sam Maloof style rocking chair class All you woodworkers,come out to Utah and build a Maloof style rocker with me. In one week you go home with the knowledge to make these rockers as well as taking home your own rocker. It will still need a lot of finish work, but all the joints and shapes will...
  19. Woodworking Skill Share
    I am considering offering a new special for those who would like to take my Maloof-style rocking chair class. After talking to a number of woodworkers, I have come up with a "class bundle" offer for a week of instruction on rocking chair science. If at least six (6) woodworkers sign up for any...
  20. Blogs
    Maloof rocking chair class question I am considering offering a new special for those who would like to take my Maloof-style rocking chair class. After talking to a number of woodworkers, I have come up with a "class bundle" offer for a week of instruction on rocking chair science. If at...
1-20 of 24 Results
Top