LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 32 Results
  1. Knoty pine computer desk

    Good pine furniture is hard to find, and my daughter wanted a computer desk for their Lake Tahoe home. I built it in two peices to make it easier to move.
  2. 48" lazy susan

    I can't take credit for the walnut table, but I did do the lazy susan. Its a 96" diameter 10 seat round table. I was lucky enough to be able to design and build the lazy susan. I designed it around the 30" lazy susan bearing from Lee Valley. The frame is made from 24 pieces of 4/4 lace wood...
  3. Bō - Experimenal Musical Instrument

    Posting this older project as I have just recently did some photography for my upcoming portfolio review. This is a final product for a class I took with a brief to design a new and conceptual instrument. I could describe in length the design process in which I started researching...
  4. Turned lidded jar - Panamanian Teak?

    Visited my son in the rural farmland / jungles of Panama - he is in the Peace Corps. Found a small piece of wood just outside his hut. Took it home and made a little jar from as my souvenir from the trip. I don't know the species, but I suspect either Panamanian teak or rubber tree. The chunk of...
  5. Maple and Wenge

    Here is the most recent box that I made. This was made this past April for a very special friend. It was made from Birds Eye Maple and Wenge. Finished in Linseed Oil. Really fun and attractive project. Not my own design though.
  6. Sliding wardrobes in maple and frosted safety glass

    This took some precision measuring and a lot of head scratching, coffee and kit kats while I was doing the drawings. Drawer fronts are mdf sprayed to match the ivory melamine particle board and assembled using minifix 15 fittings. Total width including end piece angled at 45 deg is 13', and...
  7. Custom Walking Cane, Carved & Painted Flames, Motorcycle Rider, Biker Theme Cane

    ------------------------------------------- This walking cane is a one-of-kind Iconic Pop-Art piece. The copyright is to protect my design, and the photos ------------------------------------------- Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go...
  8. bedroom furniture

    hi here is a few photos off my first attempt at making bedroom furniture it is about 7 years ago now was doing up our young es girls bedroom and my wife ask if i could do something to freshen up the furniture so i give it a little sanding with 250 grade sandpaper and re polished it with bees...
  9. Fancy Walking Cane:, Black Walnut Shaft Rib Turned, Polished Buffalo Horn Laminated Handle

    --------------------------- This cane has been SOLD Cane Serial Number #2008-23 Height: 32.25 inches Shaft: Kansas Black Walnut, with Bamboo-Inspired turning Handle: Derby Shape, highly Polished Buffalo Horn laminated with Walnut, riveted with Hand Peened Brass Rod Tip: Brass Ferrell with...
  10. Fancy Walking Cane, Curly Ambrosia Maple Handle, Black Lacquered Birch Coiled Ribbon Twisted Shaft

    ------------------------- This cane has been "SOLD" Cane Serial Number #2008-21 Height: 31.75 inches ------------------------- Welcome Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll find a list of canes that I...
  11. Folk Art Carved Face Walking Cane with Whitetail Shed Antler Handle, Mountain Man Jim Bridger

    --------------------------------- This cane has been "SOLD" (1-9-2010) Cane Serial Number #2006-03 Height: 32.5 inches --------------------------------- Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where...
  12. Osage Orange Barley Twisted Walking Cane with Walnut Handle

    ------------------------------------ This cane has been "SOLD". Welcome Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll find a list of canes that I have built that are ready to ship immediately. Also, there are...
  13. Dog food and water station

    Just finished this week. It is made from some left over barn siding I had from residing the barn a couple of years ago and some wainscoting from a remodel in the house. The paw prints are burned in. I used natural stain with 4 coats of gloss poly to bring out the reds and grays in the barn...
  14. Rubber Band Guns

    I made a few rubber band guns as Christmas presents. Two for my youngest daughters and 2 for my nephews. They were a huge hit! Yes, there are parts for 5 guns in the second picture. I had to make one for myself for protection. I used Poplar, Red Oak, Hard Maple and some EcoWood™ Ash...
  15. Pneumatic Push Stick

    From a round test piece I cut when I first tried my new band saw homemade circle jig, I devised this comfy and grippy pneumatic push stick. The bike inner tube provides a soft grip for my hand and a positive grip onto the stock I push through my table saw or my router table. While the...
  16. "Independent"

    There was a call for artists at a local art gallery. A show was being sponsored by a long time Waukegan business Waukegan Tire. They gave us a tour of their main facility and let us scrounge through bins of parts. Artists were asked to submit work "that utilize the Waukegan Tire logo, ethos...
  17. How the West was won

    This was my 5-year-old's Christmas present this year. He was BEAMING! Like everything I work on, I ended up going the extra mile (which makes my wife raise her eyebrows most of the time). Many of you have probably seen the Winchester rubber band gun posted by others previously on LJ. Instead of...
  18. Rubber Band Gun with Clothespin

    My nephew was in town for my daughters birthday so we decided to make a rubber band gun together. He is still pretty young so he couldn't do too much, but he did drill out the trigger hole. I used maple for the gun and walnut for the barrel. I also used one of my walnut Heritage Clothespins...
  19. A-Frame for Hauling My Glass Safely

    I am making this right now I will fishish it with Gloss white paint. I created my company logo in photoshop myself. I can enlarge the logo in pieces and make a stick on relief templat to hand paint my logo on the sides so I get some free advertising while I'm driving around! I made this from...
  20. Rubber shelves

    These shelves are really neat and quite simple to make unless you are a perfectionist,then you spend two weeks in the shop trying to match the colors exactly between the two sides! lol! I packed these two up and shipped them to Sweden before I took pictures of it actually hanging.I finished...
1-20 of 32 Results
Top