Search Results for ‘round table’

I created a round kitchen breakfast table to fit into a nook in our kitchen to replace an older table that was unstable. It was a fun project and took about a week to complete. Woods Curly Cherry top with a Cocobolo base Cherry pegs for accents and increased stability Finish Shellac wash coat...

This is another simple example of a "mixed wood table" using maple and cherry woods. Obviously, this style isn't for every one nor would it mix well with most other furniture. I Have found in the right context and room, such as the movie theater my home "This Old Crack House" it serves not...

I have been working on this chess board for close to a year, on and off. By far the longest time was spent making the actual pieces. There are details and videos of a few on my blog . The sides of the board box are made of peruvian walnut. The profile was made using a cove cutting setup on...

With this being the third table I have built, I wanted to do something special to challenge my skills while producing a fixture in my home that my family could enjoy for years to come. Over the course of nearly three months, squeezing in time on weekends and evenings, I build this 68-inch round...

Been woodworking for a couple years now, this was my first big project. The wife and I recently built a house, in the land clearing process I spotted a big red oak. I was planning on building my workshop beside it to block the hot South Carolina summer sun and a play area for my 2 year old...

I've long needed a side table for the recliner, and finally developed a design I was happy with. Very challenging to lay out and build, because there are no straight lines and no 90 degree angles to reference from. Steam bending would have been the ideal way to form these legs, but I had some...

This project was built with a round top from a broken table and two 2×4's. The top in this project is 30 inches in diameter. However, the designed can be scaled up or down based on your top diameter and/or desired table height. See video and build instructions below. Video of build: Build...

This was making round top table of pine boards, with router and circle/ellipse making jig. More detailed photos of that jig you can see on my post from 24.07.2015. - ''Ellipse/circle jig''. Dimensions of table top : diameter 70cm, thickness 36mm. I cross glued four 80×40cm, 18mm thick boards to...

this walnut half round is 18 deep x 36 wide. curved apron is a bent lamination with 5 plys. front join is a bridle joint and all other joints are mortise and tenon. finished with a wiping varnish.

I found this project in a 2003 Shop Notes magazine. I wanted to try my hand on a simple inlay.

We removed a dead Dogwood tree in our yard, been using the wood. Makes some interesting pieces with the worm holes and color.

i made this in 2007 in high school woodshop. like my other projects it is solid pine. it holds 44 cans of soda. it works by having half cylinders when rotated will that catch the rest of the cans and hold the rest from falling. the handles are walnut and are directly attached to the...

Hey Fellow Lumber Jocks and Guests. This is my latest creation I made for a SMSgt who is retiring. She contacted me through this site. It proved to be quite a challenge, but the time and effort was worth it. The top and shelf is made from birch plywood; the legs are made by 3×3 poplar...

Yes, it's another box from that English bloke. I've pushed the boat out a bit with this one and fitted it with a quadrant hinge to hold the lid back and a lock. As stated, the main construction is in cherry with a walnut inset lid and plinth. The tray and interior dividers are mahogany from the...

Occasional Round Table. Approx 19" top. Through tendon on the legs - a first for me. Tendons were then pinned. Half lapped cross member on top and bottom. Made from pine. Stain is a golden honey. Sprayed multi coats of water based poly. Used plunge router with attachment to cut out the...

Haven't posted in quite some time, so I thought I'd put up a couple of projects that were Christmas presents this year (2011). The first is a small (36") round kitchen table for my brother, who lives by himself in a small house. Nothing really specially about the construction - hand tool...

I started with Christian Becksvoort's article http://www.finewoodworking.com/woodworking-plans/article/build-a-shaker-round-stand.aspx , made the top 20" in diameter instead of 18" and 11/16" thick instead of 1/2". I made the middle post 2 3/4" instead of 3" since my local lumberyard thickest...

Hi Everybody, this is my first post on LJ. I`ve made the chessboard a while ago with the plan, at the time, to just frame it with a nice wood and use it as a regular board to teach my children the game. I then later decided to add some legs so you can sit at the couch when playing, that's when...