LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 52 Results
  1. Purple Heart and Maple Ring Box

    I made this small ring box as a Mother's Day gift for my wife to house birthstone rings of our two children. It's made out of purpleheart and maple scraps that I had laying around the garage and finished with spray on shellac. I used offset rare earth magnets as the hinge and stop. It measures...
  2. Maple Burl Wedding Ring Boxes

    Its been a long time since Ive posted but I managed to finally get something made. These boxes are for a buddy of mine who is getting married. I hope they choose to use these boxes in their wedding as the ring bearer box but Ill leave that decision to them. The boxes are made of maple burl...
  3. Wedding Ring Boxes

    My daughter is getting married in October and she asked me to make her a ring box. She had a rough idea about the style but was not sure about the wood species or dimensions. So I built her eight boxes. The boxes are made from a mixture of Walnut, Black Cherry, Maple, Mahogany, White Oak and...
  4. Round Box with Lid and Base

    This is a lidded box turned on the lathe. It is maple with a beeswax finish. It stands 4 3/4" tall to the top of the finial and the base is approximately 2 1/2" x 2 1/2". I stained the base with dark walnut Watco oil and finished over that with beeswax. It was designed to hold a ring so the...
  5. Ring Box

    I made several of these for a couple of upcoming craft shows. Made from some old oak true 2×4's. Finish is three coats of homemade wipe-on poly. Used Minwax polyurethane thinned with mineral spirits.
  6. Ring Box

    I wanted to make a small ring box. To hold a ring. In a box. I used some really old, really dry walnut that I sized to 1/2". Cut a bunch of tiny tiny dovetails with a thin kerf DT saw. I wanted to use some flooring cut from a old church undergoing renovation. Had to resort to diamond...
  7. Heart ring box

    Ring box made for brother-in-law. 3 pieces of walnut thin bottom, scrolled middle, and shaped lid. Round hole for ring and cutout is for a mortised lock accessed through hole in the side. Only used scroll saw and drill press. Finished with poly wet-sanded to 2000 grit and buffed. Used SOSS 8mm...
  8. Ring Box

    Finally got around to making a ring box for my fiance. We got engaged in May and I got her a box made for Valentines Day. Don't mind all the sappy writing around the box the pictures are from full on in the moment of giving it to her! We are getting married in July this year. It is based off...
  9. Small ring box, aka Grease box.

    This is a small ring box, aka grease box, that I built for my daughter out of a few scraps and about 1 hours worth of work. It is Maple sandwiched by Walnut, it is 2.25" square and pivots on a 3/16" dowel. The box was sanded to 320 grit and spray finished with 3 coats Minwax Fast-Drying...
  10. ring box

    Hi everyone This is a ring box that will be carried up to the altar. My son and I built it together. This was a project that my son wanted to do so he could show me veneering, which I have never done. He was right when he told me that veneering was calming and fun. The design was based on...
  11. My first grease box

    I'm finally getting to put the finishes on a few projects. This is my first grease box. It's tulip wood with three coats of clear. It has felt lined bottoms as it's for my wife to keep her wedding ring and friendship ring in. I plan to make another in the future and actually use it as a...
  12. Heart Shaped (ring) Box

    Made this ring box for an upcoming wedding (not mine). It is genuine mahogany with Kelly green flocking. A steel pin is used to pivot the lid and a magnet snaps it in place.
  13. "xbox"

    A small box made of Iowa walnut with a three gereration connection to the maker's family. . Beautiful box joints highlight the drawer which slides through from either end like a matchbox. A turquoise inlay on the top establishes the visual pun of "xbox." A dated maker's mark is burned into the...
  14. Ring display box

    Here is a special project for storing and displaying a special ring. The box is 4 1/16" square and 4 13/16" high. The top is cut at a 60º angle and has a flush cover. The entire project is 1/2" bubinga and is finished with 3 coats of danish oil. The cover is hinged with brass pins, is opened...
  15. Latest Turnings

    These are the two most recent items created on the lathe. The first is a burnt cherry bowl that I worked on over Mike's place (jockmike2). He was kind enough to donate this beautiful wood for the bow. The goal was to work on thinner walls and more curvature to the finished piece. I would...
  16. Ring Box

    My eldest daughter is getting married this year and this is another of those requests where I get sent a picture or link with the request "Dad can you make…....." She sent me quite a few differents pictures, but in the end I decided to make my own design. I used two 10mm diameter rare earth...
  17. Heart Shaped Ring Boxes

    just finished these small heart shaped ring boxes. This was a good project to use up some scrap pieces of walnut and cherry. T he boxes are about 3 by 3 and 1 inch deep. I lined the inside with some marron velvet from an old dress that my daughter gave me.
  18. RING BOX

    Dimensions cca 9×3.7×6 cm, finish wood oil, made of walnut glued parts. Hidden hinge from E-Bay 8mm diameter, closing with two 5mm magnets.
  19. Mesquite Jewelry box

    This is another one of those "experiments" I like to try. The box just happened because I wanted to find a home for the lid. A tip o' the hat to Brian who posted the web link to MXC Design. This artist incorporates glass into their boxes and that is something I wanted to try out (just to see...
1-20 of 52 Results
Top