LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 50 Results
  1. Man Box For Husband

    Well its finally done! I finished the "man box" I was making for my hubby. It only took us a month working about 3 hours almost every night somewhere between 80 and 90 working hours total however a lot of that was learning time for me I take longer then I should to get things done since dad...
  2. Rabbit Hutch

    It's a while ago when I posted a project here on LJ's. So, I recently finished this new rabbit hutch, I made it for my wife. Most of the joints are half lap joints. All hand cut. Almost all of the wood is reclaimed wood. The finish is 2 layers of stain and one layer of outdoor-laquer...
  3. Easter bunny

    This is an Easter bunny with basket of candy. Carved from basswood and 4 inches tall. Claude
  4. Bunnies...

    Just finished this little pair of bunny rabbits for a customer's special order. About 4 inches tall, carved from basswood. Claude
  5. Another Easter Bunny

    Another Easter bunny - you can never have too many… Carved from basswood, and about 6 inches tall, painted with acrylics. Claude
  6. Maple Sliding Dovetail Candle Box

    Tried making a candle box. I just used dado's and rabbits to put the box together wasn't trying to go too fancy. Then i made a dovetailed lid and groove to slide in, next time i think i'd just do a dado'd lid. Anyways i'd love to hear any comments good and bad. Thanks for looking guys.
  7. Bit of neighborhood whimsie

    Like a lot of places I'm sure there seem to be more people walking around the neighborhood as of late. Our local school has had a few things to encourage people to do scavenger hunts and other things such as stuff animal zoos where people put animals in the windows so parents and kids can go for...
  8. Easter Bunny with Egg

    This is a little Easter bunny holding up an Easter egg. He's 5 inches tall, carved from basswood, painted with acrylics. Claude
  9. Folk Art Bunny Rabbits

    This is a pair of folk art style bunny rabbits. They stand just under 5 inches tall, carved from basswood, and painted with acrylics. Claude
  10. Happy Bunny Rabbit

    This little bunny rabbit is happy because he got one of the farmer's carrots. He's 5 inches tall, carved from basswood, and painted with not-toxic acrylic paints. Claude
  11. Recycled Pine Box - Trash to treasure

    This box started out as step stool someone gave away on Craigslist. It was a mess when I got it. It was a broken down pile of dirty boards. I salvaged what wood I could and put it on my self. Months later, my Sister requested a box to store pictures. This is what I came up with. It's...
  12. Calendar Keeper

    My daughter received a "prized" Hannah Montana calendar for Christmas and needed more than just a nail in a wall to hang it in her room. My wife has a Lang calendar holder that this is based on. This is made from Quarter sawn sycamore, however, I turned the two sidepieces 90 degrees, so...
  13. dining room hutch

    This is a New Yankee Worshop plan made from pine. The base cabinet has edge joined solid wood sides. The top is jointed with biscuits. The back of the shelf unit is bead board tongue and groove. This was an awesome project to learn lap joints which were used on the face frame, and of course...
  14. Matching mahogany highboy and lowboy Dresser

    This solid mahogany pair was made about 5 years apart. The highboy was made first. It was my first try at carving. It is also the first piece of furniture I made. The design came from a Fine Woodworking magazine. All drawers are dovetailed with solid oak sides and backs. The finish is water...
  15. Not by the Hare on my Chinny Chin Chin, Carving

    It is probably fairly evident by now that I am not the most serious of peoples….a bit goofy, even…. This carving is called "Not by the Hare on my Chinny Chin Chin"... It's a bit of a play on words. I carve using rotary hand tools… A Foredom, to be more specific. If you aren't familiar with...
  16. Rabbit Shaped Coin Bank

    Coin bank shaped like a rabbit. I saw this on Etsy and realized how easy it would be to make. it was. just some scrap pieces of cypress and some poly acrylic finish. the sanding was the hardest part. i left some rough spots. here is my inspiration: i turned the...
  17. Easter Rabbit Bowl project made with Inventables X Carve CNC.

    Easter Rabbit Bowl project made with Inventables X Carve CNC. This project is nice and simple for those wanting to start using there X-Carve 3D Carver straight away after building it. You can also use the below link to open the plans directly in Easel.com and press carve and you are on your way...
  18. Pine Mail Box

    After a very long time the metal mailbox that served us so well is getting retired and it's time for a fun router project in building a new one…. The funny thing is when I decided to make a mailbox I decided since I never made one before I would build a mock one to see how it all went together...
  19. Scrimshaw Art Walking Cane: Floppy Eared Bunny Face, Walnut, Spalted Sycamore, Fancy Barley Twist

    ------------------------------------ This was a commissioned project, and was shipped to Hutchinson, Kansas USA. Sadly, the owner of this walking died this past March, 2009 and I'm not sure where the walking cane ended up going after that. Cane Serial Number: #2008-09 Height: 30.75 inches...
  20. Getting wood from cutting logs.

    I've got a big cheesy grin from this project. I picked up my first bandsaw a couple months ago. So it wasn't long before the "thrifty" side of me decided that yeah, picking up old wood and pallets was fine… but you know… there's an awful lot of free wood in the form or trees hanging around. And...
1-20 of 50 Results
Top