Search Results for ‘purchase’

Couldn't pitch the tiny little offcuts from previous cutting board posting. These took about 15 minutes, but my wife loves them. wenge, yellowheart and Martin Luther King black cherry. Inch and 3/8 brads with the heads clipped off. Brads were .062 dia , drilled a .050 pilot hole about 1/4 deep...

Have fun making your own Christmas Tree Stand. Merry Christmas. God fornøjelse med at lave din egen juletræsfod. Glædelig jul.

Today i worked in the shop and saw that my sliding table is really off (not parallel at all to the blade) and all the material that I cut on it for a magazine rack I am building has to be cut again. You probably know how this feels…. So, instead I made a duck that wobbles when you walk it for...

This was a commission for a client in Chicago. I was going for a kind of deco look. There's a slight bowfront to the birdseye drawer fronts. The bottom drawer set is actually one drawer with a slot down the middle so it looks like the others. The handles are wenge. The carcase and top are all...

I have finished my hardware storage for the new shop. I need to thank lumberjocks Kent Shepherd and Grelcar for the inspiration of this cabinet. It is plywood dado shelves and same trim detail as I trimmed the doors and windows with. Made the Crown out of some scrap pine. Stained to match...

I made this arbor for a friend of my wife's wedding. It needed to be portable to be moved to multiple locations so I had to build it without the corner supports. The person that put it back together at the wedding site put it together a bit wrong but it seemed to have worked out and her friend...

I needed a drill press table for the castle bookcase I'm building (you can see that project on my blog if you want, but I'll post it here when I'm done). I saw the idea somewhere on LJ….I think….so whoever the original creator is, thanks! If I knew who you were (sorry!) I'd totally give credit...

I built these vanities for my sister - one for the main bathroom and one for the master ensuite. They are a first attempt at a case unit. Both are 60" wide; overall 30"H (with 6" legs); two different layouts; they are awaiting their new home and knobs are yet to be finalized. The shaker doors...

Sliding lid box made from oak and sapele

Follow this link to my Facebook album.

I've never tried an end grain cutting before. I found a board at the shop and went for it. The juice ring and handle made this one for me more than just pieces of wood glued together. Decided to give to my Mom who was thrilled with the surprise. She is afraid to use it!

I am using solar cooker for cooking for nearly eight months in a year. All these days the cooker used to be placed on the floor. To put the food containers in and remove them after cooking I had to bend to complete the operation. With advanced age it was a little difficult to complete the task...

My daughter and son in law wanted a sleigh bed. They had a picture of what they wanted but wanted several changes. Higher headboard, more clearance underneath, ect, ect. 145 sq. ft. of rough cut cherry consisting of 1×10', 1×12", and 2x all 10 feet long was placed in the garage to dry to about...

A sidewalk sign for my wife's pottery studio show next weekend (2) 8' lengths of 1×6 x 5/4 deck cedar and cut it into 2.5" strips, ran a dado in the center for sign to insert. Mortise and tenons for the bottom rails and lap jointed two 3/8" slats for each top rail and glued everything together...

Hey folks, Been a while since I posted a project, but doesn't mean I haven't been woodworking. Here's the Adirondack Beach Chair I made from the excellent plans I got from Phil B. Check out my blog for all the gory details.

SOLD: All of these White Birch Tollikers shown in the photo have been sold. ALL HAT MAKING ITEMS THAT I HAVE IN STOCK ARE LISTED IN MY ETSY.COM ONLINE SHOP, click here to check inventory ------------------------------------------ What does this thing do? Watch this video by California Custom...