Search Results for ‘pull out’

This is a bed that was completed in February 2010. It is a murphy bed turned sideways with a chalkboard and a wide bookcase. I've build a sideways chalkboard bed before but not with the desk style bookcase on the end. The problem with the horizontal murphy wall beds is unless you place it in...

This is a platform bed that was built to match a customer's existing furniture. We built the bed only without a headboard. It is our standard Captain's Pedestal with a slight modification at the drawers closer to the foot. We combined the smaller drawer into one big drawer. We also added a...

I had this gap under stairs which is great for storage. We used to stuff all the toys there. It ended up being a mess at one point and finding things way in the back was a problem. The idea here was low cost. Also the inside was not square in anyway. So adding drawer slides would involve more...

I built a simple 2×4 modular miter saw station last year with an extension wing and an integrated T-track for a sliding stop block. I left the underside of the station open at the time, until I could figure out what type of storage I wanted underneath. In my latest video, I added a few storage...

I've been re-configuring, re-organizing, and de-cluttering the shop. One of my goals was to make some room to get the blade box, dado box, and Leigh jig parts box into the climate controlled shop area rather than the main garage. I managed to consolidate things enough to get the tall Craftsman...

At the end of the year I started selling off some of my display Murphy beds. Because of this I was left with a bare showroom. I wanted to put something on the floor that I haven't had there before. I decided on the Euro Murphy bed. This is a bed that I've built about five times before. This...

I built two pull out shelves for our pots and pans. Now I just need to build more for the other cabinets. I used select pine for the sides and a 3/8 inch round over bit for the top, miter joints, and a rabbet for the bottom. I used 3/4" birch ply as the bottom, over kill I know but that is...