LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Living Room cabinet

    This is my second attempt at raised panel doors. I created my own jig for my Delta Unisaw to make raised panel doors on the table saw. These are the largest doors I've made in raised panels. The first attempt was considerably smaller. My 14-year old son and I worked on this off and on for...
  2. Power Tools, Hardware and Accessories
    Hello! I have had a Wen 10" Band saw for a while but have had an issue with the blade tracking. When I tighten the tracking knob to a certain point it "pops" and slips out. I tried cleaning the threads with a tap and die set but the issue still persists. Am I going to have to drill it out and...
  3. Finishing
    I am finishing a tiger maple bar top and want to pop the grain. I plan on using trans-tint dye to start the grain popping process. I have heard that I should then use boiled linseed oil to really pop the grain. My concern is that I plan on top coating with a 2 part clear epoxy, and I am...
1-3 of 3 Results
Top