Search Results for ‘politics’

This truck is like the big dirt contractors are going to. If you like to do woodiworking with a lot of miters and angles, this is the one for you, I never counted them but there are more than enough. Each wheel has 72 slots to make the thread.this truck is made of walnut,soft maple, hard...

Looking at ken90712's toolbox reminded me of this quick get me out of the house for a few hours project. It isn't as fancy as Ken's (in fact, it isn't hardly fancy at all!) but I enjoyed making it. It's 31" L x 11"W x 12" T (outside), which is just long enough to carry a handsaw. I use it to...

All, This is a curved-lid box made from padauk. Ends are milk-painted poplar. Finish was several coats of gloss lacquer. This was based on plans from Woodsmith. You can get a free copy here: http://www.woodsmithshop.com/download/502/curved-lid-box.pdf Thanks, Tim

The wood is mahogany with a few coats of Watco Cherry oil. The topcoat is GF Arm-a-Seal. I was unable to rotate the photos when posting them on LJ's.

I made this for a friend. The main part is made from Walnut and the plaque itself is made of ash. The ash is probably 1/4 quarter with a Roman Ogee rout. Steve good pattern off his online catalog. It a little frustrating at times scrolling all those letters but It turned out nice and I'm happy...

I went to the Woodworking Show in Tampa, Fl last week and picked up a couple blank turning pieces and this is one of them. I have not turned Spalted Red Elm before and found it a delight to turn although the odor it gives off smells like a horse stall! I learned how to make the unique finial a...

Several months ago my fathers neighbor had a white oak tree that blew over. Dad picked up a few of the logs and gave me one. I cut the bowl round on my bandsaw, then I turned the bowl about 75%, sealed it and put it up to dry in a paper bag. After several months of drying I finished turning...

I was was playing around with cutting cove molding on the table saw… this is the final result… Again from recycled pallet wood

This was my first attempt at intarsia.

Oh How I Love Benches! Who doesn't like a solid bench? Here are a few pics of some interesting designs I have made over the years. Mostly, these benches have been made from recycled/reclaimed materials. I actually use a large barnboard bench for my coffee table, very versitile. And, if you...

Sorry it took so long to follow up on my last post of this project, I just wanted to add more pics of it to show a little more on how it works and was made. I will leave room another pic if someone wants to see a close up of a certain area. I think between my two post of this project...

Designed and built for my friend Danada who wanted a cabinet to keep dvd's and cd's. Its named after her, because, like her, its small size give no hint as to the amount of trouble it can cause. The designs on the doors are taken from her favourite artist (Don Li-Leger) and are burnt it. The...

A pair of goblets made from spalted beech. Featuring two captured rings, and finished with a food safe oil. Here is the link to my youtube video explaining how to form captive rings; And, if you live in the UK and would like to purchase these unique goblets, here is the link to the eBay...