LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 79 Results
  1. Drawers, Drawers, and More Drawers | Custom

    This is a bed that I completed in February 2006. It is built using pine wood and has 14 drawers. Two of the drawers, the centers, are five feet deep. The nightstands are a floating style each having a drawer and are attached to the side of the bed, no floor support. The five foot center...
  2. The Rains Platform | Custom

    This is a platform bed that was completed on July 16, 2008. The wood that was used for this project is maple and is finished in a cappuccino finish. This is a platform style bed and only mattress, no foundation, will be used. For this reason the slats are constructed with just a couple...
  3. No Glue Platform Bed

    After having a too high bed (used with under-bed shelving for storage) which I didn't like, I disassembled it and recycled the plywood for my router table (still in the words for lack of time), and instead, built this low platform bed. This bed is made entirely using 3/4" chinese (I assume)...
  4. Storage, Storage, Lots of Storage | Custom

    The is a couple beds that were built for the same customer in November 2013. They were designed t have lots of storage space. Starting with the headboard it is very deep with pull-out bins on the side. We also added 12 drawers under each bed for additional storage. If that wasn't enough, we...
  5. Stair Well Storage

    I like many Lj's have a shop in the basement and as we all know with basement shops we need to maximize the space that we have. I made a plywood rack in the ledge going down the stairs, a spot to keep solid and also a platform where some extra stuff for the dust collector and old tools live...
  6. Drawer Pedestal | 6 Drawers One Side| Custom

    This a drawer pedestal that I made in October 2015 for a smaller room. Even though it is bed to add as many drawers as possible, if the bed is going close to a wall then you will not be able to access them. I built the Captain's drawer pedestal with a false panel on one side. I put a door on...
  7. Raised Platform - Bedroom Remodel Pt. 3

    The is one part of a multi-part bedroom remodel that we did for my son. He was starting to outgrow his old room redesign and he was starting to need a more organized space to live and play in. The center piece to my son's bedroom remodel is a raised platform. The platform is 14 feet long and 3...
  8. Platform Bed

    I made this bed for my son Gabriel from 2x lumber and some 4×4 material reclaimed from a pallet. I have to say that I am quite pleased with the outcome. I went with a simple design and simple materials but was still able to produce what I believe to be a very nice piece of furniture. The side...
  9. Hat Making Tool: Restored Maillard Allie Formillon, with a new Plot Base Board, and Thumb-Nut Wrench

    This is a hat making tool, used to transfer the head shape measured with a Conformer or a Conformateur , to the actual sweat band of a hat. This allows any bumps, or dents in a person's skull to be translated to the shape of the hat. ------------------------- Purchasing Formillon (Formillion)...
  10. You made your bed; now go lie in it

    I can finally sleep in my new bed!! This full-size platform bed is oak with poplar drawers and plywood platform parts dadoed and pocket-hole screwed together. The drawer configuration is the same on both sides of the bed, but the left-side drawers are ¾ extension and the right side are full...
  11. King Platform bed | Custom

    Completed Aug. 10 2007. This is a platform bed that I custom built for a customer. It is based off a design that I usually order in from a supplier, so I don't normally build this style. The wanted it in a king size, which is not very common in platform beds. They also wanted a special...
  12. Modern Style Platform Bed

    Finally finished my modern style platform bed after about a year of chipping away at it. The reason it took me so long was that I wanted to try my hand at veneering and figured a bed of this style would be more stable over the years if it wasn't made of solid wood. The bed consists of 5 pieces...
  13. Phillies Storage Bed | Custom

    This is a custom design that was completed on March 21, 2009. It is a storage style bed that I've built before, but with an added design element on the top of the headboard. The customer wanted a Phillies logo that could be removed later on if needed. It has plenty of storage space. The...
  14. Drawer, Drawers, and More Drawers| Custom

    This is a platform bed that I built with LOTS of drawers. It has a total of 18 drawers with a double door at the foot. I call this my Triple Tier Pedestal. These drawers are also deeper then most dressers. They are 18" compared to most dressers are usually about 14". We also added moldings to...
  15. Planter platforms/Covers for ugly post foundations

    I was asked if I could build something to cover some ugly post foundations at a friend's house. The previous owners apparently felt that shapeless lumps of concrete with random rocks stuck in it was attractive. My friend did not. She wanted something that could hold potted plants. I took some...
  16. Washer and Dryer Raised Platform

    Made this for friends. Raises washer and dryer up 15" allowing for three laundry baskets to fit under them. Made from dimensional lumber (2×12 and 2×4) and 3/4" subfloor plywood. Finished with self-adhesive tile on the top and painted shoe molding and face. I also routed notches into the top...
  17. Installed Bedroom Suite

    Built this bedroom suite for a friend. Wasn't able to get glamor-shot photos of the bed alone since it was installed on site, but here it is in its final space (along with her daily mess). Practiced a few different kinds of joints with chisels and handsaws since it was to be painted, so it...
  18. platform bed!

    my step daughter needed a new bed and told the wife no need to buy one, i'll build it! got a little carried away, not sticking to the plan. even though i had no plan but to keep it simple. it's three pieces, headboard, bottom casing, and top casing that holds the mattress. but still weighs about...
  19. The Bookcase Platform | Custom

    This is a bed that was finished on 09-08-2007. It has a lot of storage options. It features an extra deep bookcase with pull out storage located under the headboard. This one also has six drawers of storage on one side of the bed. It can accommodate another 6 drawer unit on the other side...
  20. Horizontal Murphy bed with Bookcase | Custom

    This bed was completed on 9-7-2007. I is one of my horizontal Murphy bed style. The customer saw one that I built similar to this one and liked it but wanted to change up a few things. Instead of the Euro style, this customer chose the Alpine. On the bookcase they wanted all drawers instead...
41-60 of 79 Results
Top