LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Clipboards

    You make one for the shop and everyone wants one. From scraps to beauty. Edge glued, planed, cut 9×12.5 (or whatever works for the pattern) then sealed with wipe on laquer and waxed. Up to eleven and counting…
  2. Chairs

    These chairs were in a variety of pieces outside they'd been rained and weathered for years. I got a new- well new to me- table and needed more chairs hoping at least a few could match after pricing new ones and laughing at my predicament ( nice big table the whole family can gather around-...
  3. Woodworking Skill Share
    I purchased 14' of 6/4 African mahogany rough wood. I cut the wood into 3 pieces. (4', 4', and 6'). I use my planer first to get it down to size. I've had the boards in my garage for about 2 weeks now. Because it's been about 100 degrees in my garage, I decided to take it to my local lumberyard...
  4. Wood & Lumber
    ATLEAST 250 year old barn located in central east michigan 2 miles from Lake Huron. Found these boards under 2 in planks. This layer is 5/4 we planed it down to 1 in and sanded. Any ideas what it could be.
  5. Blogs
    visualizing a cutting board in SketchUp I got some good suggestions in my last post about what to do with this block that I glued up from mostly reclaimed red oak pallet wood: One of the ideas I liked best was an end grain cutting board. I realized I had pics of each side of the block, so I...
  6. Blogs
    Canasta These images document some of the process of my most recent completed project which was a reliquary dedicated to my Mother. The requirement for this project was to design and make a Reliquary utilizing a door and a drawer. Our warm up project was to fit a drawer with half blind...
  7. Wood & Lumber
    Planed Illinois Sugar Maple boards that can be used for paneling or tables. A woodworker's dream! Approximately 955 sq ft in 1/2" thick boards in the rough. Half inch boards range from 5 feet long to 10 feet long. All boards have been dried for over 2 years and are ready for a project! Will sell...
1-7 of 7 Results
Top