LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. 8 String Guitar

    Here is my final RG8 style custom 8 string guitar. It took me quite a while to finish but it is finally done! Solid Bubinga body with a Wenge accent stripe. Maple and Wenge laminated neck with a matching Bubinga accent veneer cut from the same wood as the body. Rosewood fretboard with 24 frets...
  2. 8 String Guitar Body #2

    Finished my 2nd guitar body build! It is an extended range 8 string guitar body made out of solid quartersawn bubinga with a small diagonal wenge accent. This was a remnant I had left over from my coffee table I built a few years ago. I had always planned to turn it into a guitar body and I...
  3. Electric Guitar that can Play the Drums, Piano, and Cello

    This is my second guitar build. My first guitar was a Grizzly Telecaster kit. For this project, The body was made from a nice mahogany slab I had come across. The neck is from StewMac. Here are some details: Body: The body is a single piece of mahogany. Since it is "thinline" style, much of...
  4. Finishing
    I am using Minwax Helmsman Spar Urethane thinned with 30% mineral spirits and spraying it on cedar with an air detail sprayer. When it dries it has speckles in it and is rough almost like it has sand in it. We are blowing everything off and using tack cloth on it and sanding with 220 before...
1-4 of 4 Results
Top