Search Results for ‘pedestal’

This taxidermy pedestal was made to hold 3 mounts for the Texas Slam. Base is burled redwood and the pedestal is twisted juniper

This is an EZ Mitre, Shell box with pedestal base. Size - 100mm square by 50mm high Materials - Ebony, Sycamore, Sapele, Birch ply and green baise. Glue - PVA Finish - 600grit then Wax over Sanding Sealer Black and white diamonds midway along each top edge (pics 1 and 2). The four sided...

This fall's pet project was a video arcade that plays the games of the generation I grew up in - the 70s and 80s. I took a number of photos with my cell phone, but about a week ago I decided to throw it in the wash with my laundry. As a result, I have only a few stray pics from the construction...

Had a customer that wanted a pedestal table for there breakfast area and found a picture of one on the web they liked. I had not done one of this style before and thought it would be a challenging but doable project. Once I broke down the different parts into individual projects it was not to...

I just finished this square dining room pedestal table: 68.5"x68.5" top & 32"x32" base. It's constructed in 2 parts, base and top, which slot together around the internal legs. The table is standard 30" height at the top. The top is constructed of two large sheets of plate joined 1×10" pine...

Another example of my Cambridge pedestal dining table. This one is 42" x 96", expandable to 120". The top is solid 6/4 maple, stained a custom color to match the homes trim. The base is also solid maple and finished in a custom tinted waterborne poly to match the homes cabinets. The top...

Heres a log pedestal I made! It was very easy! The log is Elm wood Cut it rough in the yard… layed it on the shop bench.. Used a square to project a square line to cut.. Cut with the chainsaw, then 60 grit on an angle grinder, then finished with a palm sander and some linseed oil! Very...

4 player arcade pedestal designed and built from the ground up. The pop out in the front is the proper width to be able to play pinball using buttons mounted on the sides. Black melamine with chrome T-molding. I laser cut some routing templates for the deck and acrylic overlay pieces on the...

Here is one of my Yorkshire single pedestal dining tables. This one has a custom hand hammered copper top. The base is a 2-tone distressed finishes. I design and cut all of our pedestals in house. The base is made from 2 rings. The bottom ring is made from 8 equal segments cut at 22.5 degrees...

Here is one of our Walden pedestal tables. This one is 40" x 84" with an additional 24" of leaves. The finish is General Finishes Enduro black poly topped with Target Coatings satin EM9300 with 5% cross-linker added.

This is a 12' long Cambridge pedestal dining table. The top is solid sap white hard maple, while the pedestals are made from 16/4 solid ash. Finished with one of our proprietary colors and topped off with Target Coatings CV8000, cross-linked of course.

This washer/dryer pedestal is 30" x 60" and has drawers for holding dirty clothes until laundry day. Now the dogs cannot help themselves to dirty socks for a game of tug-o-war! :-D

I repaired the old washer & dryer one too many times, and it was time for an upgrade. And of course I wasn't going to waste the green backs on those matching pedestals. Instead of just making a torsion box for them to sit on. I managed to make them so that each would have a deep drawer. No...

Title inspired by a Led Zeppelin track. This is an EZ-mitre, shell box with pedestal. Materials - American Black Walnut, Sycamore, English Yew (stringing), self-adhesive green baise. Size - 117mm square (approx') x 65mm (including pedestal, top 105mm square) Glue - PVA, Cyanoacrylate gel...

this piece is a commission. it is based on a stickley/limbert piece that the client had purchased and then returned. they wanted it to be taller and made of cherry. they also wanted the top to match an exisiting side table (cherry with lacewood top). it is pretty straightforward piece, but...

This bed that was built in September 2010 was designed for lots of storage. It has a total of 12 drawers in the pedestal, double doors at the foot, and two large pullout bins under the headboard. This is a version of my Storage platform bed The customer didn't want the bookcase headboard...

A commissioning penant is often given to a Naval Commanding Officer from the Chiefs' mess or the wardroom to signify they held Command of a wartime ship, squadron or submarine. This project was done at the request of my Chiefs' mess for my outgoing CO or "Skipper". I compared some ideas online...

Here is our 3rd taxidermy pedestal. The pedestal is juniper, we cut the base out of burled pine and inlay it with gaspiete. It was finished with polycrylic. Stands 40" tall 24×30 This weighs about 165lbs

This is a little twist i did on a decorative laminate pedestal. I basically built the plywood box then jigsawed out an area to insert two 3/4" thick mahogany pcs mitered at the corner. I drew the shape i wanted & started hogging it out freehand with a core box bit in a formica router, eventually...

This piece of juniper was found in an old burn area and had been burnt which gives it the rich gold coloring. It is a smaller pedestal and would work well for a small deer or antelope. I am sure a taxidermist could do something pretty amazing with this piece. I can visualize and buck and doe...