LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Greene & Greene Inspired Pedalboard

    This pedalboard was commissioned for a guitarist friend of mine. It is constructed of walnut, with a 1/2 birch plywood surface that is captured via stopped dadoes. The pyramid walnut plugs were added for decoration along with the custom logo. The outside is 2" thick at the front and 1" thick...
  2. Guitar effects pedal board

    A pedal board I made for a friend, for his guitar effects pedals. All screwed together in case alterations were needed. He added the black velcro tape and filled it with pedals!
  3. Pedal Eagle Airplane

    Did this project a few years back. It's a pedal plane. That means a child can sit in it and pedal it around. Steering is accomplished by moving the control stick left and right to turn the tailwheel. The project was plans-built. Plans came from Aviation Products at...
  4. Pedalboard

    Although the instrument is not finished, be ended this 25-note pedal, is based on a treaty of Spanish organ building, completely handmade, with woods in the area: pedal hikes are mahogany, and are higher Guaimaro, the pedals are Flormorado well as the framework or structure of the pedal. It...
  5. Pedal clamp

    This is my first try at an idea I've had kicking around in my head. There is a rubber pad at the clamp point and it holds great. I am open to any suggestions.
  6. "Pop" Gun Pedal Plane

    Just finished a pedal plane for my oldest grandson. The fake radial engine was made from plywood, steel bowl and PVC for the cylinders. The prop turns when you pedal the plane. It is run by a twisted heavy duty rubber band.The stick steers the tail wheel. The prop is made from a piece of 1/2"...
  7. Dump Truck Pedal Car

    I built this as a gift for a friend's son. I later built one for my daughters. I used 1/2 MDO for most of the build. Plans are from U-Bild - jason
  8. Dust Collection Cart with Window — for Shop Vac and Cyclone (v1)

    At the moment my only dust collection equipment are a broom and a ShopVac. I bought a cyclone on EBay from "eastcaroga" and thought I'd try to cobble a cart together. As a beginner project this was also an excuse to practice a few joints. There are a number of potential improvements so this is...
  9. Off Topic Coffee Lounge
    My switch from a Mac to a PC hasn't been going too well. Currently, I'm having trouble with the CD Drive on the PC. It will open audio and data CDs but doesn't recognize a blank CD that I need to burn files on. Any ideas?
  10. Blogs
    The Beginning... My son, Cody, is an aspiring guitar player… He needs a pedalboard to house all his effects pedals… If you're not familiar with these, check out this link… First of all… he can't find one EXACTLY set-up the way he wants… So, WHY NOT BUILD ONE??? I started it this past...
1-10 of 10 Results
Top