LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Dining chair no.8

    This sculpted dining chair built from solid Walnut and Curly Maple was designed by me and built by my self and my apprentice who did 80% of the work of course with a few pointers. The chair has Maloof joints to attach the legs to the seat…...strong! The back braces were formed using bent...
  2. Rocking chair - Walnut & Southern Yellow Pine

    Inspiration 2.0 - Walnut and Old Growth Southern Yellow Pine This sculpted rocking chair is built from 2'' Canadian Black Walnut and OGSYP accented with Ebony plugs. This is a large version ( 5' 8'' - 6'2'' ). The leg/headrest design borrows more form the Maloof design with legs extending like...
  3. Sculpted side table

    This sculpted side table was designed by me but influenced by the style and joinery techniques of Sam Maloof. Built from solid Walnut and Cherry. All joints have been reinforced with internal screws and dowels. The legs and table support have been sculpted into a main center post with an organic...
  4. Cherry Simple Rocker

    This is a Cherry Simple Rocker designed by Scott Morrison Good design and very straight forward to build Features: Flexiable grain matched back braces Hand sculpted seat Ebony accent plugs The changes I made was to use 3 screws in the head rest and we left a reveal on the front and back of...
  5. Sculpted cherry Bar Stools

    A beautiful yet comfortable bar stool designed and built to last generations. With its hand sculpted seat and great lumbar support you'll never want to get up. Shown in Canadian Cherry approximately 21"W x 20"D x 33"H This is Scott Morrisons design I purchased the templates and video for the...
  6. Walnut and Lacewood rocking chair

    This chair is a small version of the sculpted rocking chair I make it was built using Walnut and Lacewood. The seat is 2'' thick but made with 1.5'' of lacewood then laminated with book matched pieces of 1/4'' walnut, when the seat is sculpted the lacewood is revealed. Also the lacewood...
  7. Double rocking chair - The Hand Holder (-:

    This chair was built using 2'' QTD Lacewood with Ebony plugs, it is based off the design of Hal Taylor large but adapted to seat 2 people. The chair features: Coopered Headrest Form fitting flexible back braces Hand sculpted everything Hand rubbed oil finish Bent lamination - rockers and back...
  8. Blogs
    Attaching a coffee table storage shelf with dowels In this time lapse, i'm building a trestle coffee table from Walnut. At this point i'm attaching the underside storage to the top of the table. The underside of the top and entire storage shelf has been sanded up to 500 grit and buffed with a...
1-9 of 9 Results
Top