LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Palletwood King Size Headboard

    This is my first commission piece that was completed this past week. It measures 78" x 48" and has white oak posts. It is finished with Min-wax natural stain (1 coat) and 4 coats of spray lacquer. I was pleased with how it tuned out.
  2. Small sign for my shop

    Last week I finally made myself a small sign for my shop. Now my visitors and the delivery men will be able to locate my shop a little easier I hope. It is made out of some palletwood and 4mm mdf. I used my lasercutter to cut out the all the letters and the logo. I captured the making of the...
  3. seesaw 1

    personal challenge -request from girls at the preschool
  4. Laundry bench

    This was a custom order that came out of my previous project. Most of the wood is recycled pallets, including the tabletop. The only wood I had to get was the apron and longitudinal shelf support beams. The bench measures 60×36 x 12 inches, and took me a week to build. Thanks for looking
  5. Pallet Wood Gift Box (Sterling Davis Pallet Upcycle Challenge)

    I made this gift box as my entry to Sterling Davis Youtube channels Pallet Upcycle challenge 2015.I think It turned out nice and enjoyed making it.I used mitres on the corners for the first time and since I have no table saw to make splines I used dowels as splines.I finished the box with danish...
  6. Sideboard - another pallet project

    This took me a year to build, and I was ready to give up a few times. I had a vision of it in my head though which kept me going. When I started it, I only had a handheld circular saw to operate with. Cutting the grooves in the frame with it took quite some time. I since acquired a router and a...
  7. Entry table in distressed teal

    I built this table over the past couple of months out of pallet wood. It measures 42' wide, 34.5' tall and 14' deep. I primed it and pained it with Behr outdoor latex paint that I got for 50c out of Home Depot return bin - two layers of primer, then two layers of paint. I mixed some plaster of...
  8. Pallet Wood & Milk Paint Sign (video)

    I made this sign for a milk paint company to display their range of colours on,it is made out of pallet wood and transport box lids I collected from dumpsters. I used my scrollsaw to cut all the letters out by hand using a template I printed out and glued on. I glued the letters to the sign with...
  9. Pallet Wood Wine Gift Box (video)

    We made this pallet Wood, Wine Gift box for a the pallet up cycle challenge on YouTube. We designed the box so the label and bottle top was always visible. I used an old piece of nylon rope and pallet off cuts for the handles. It is finished with milk paint and the stencils were applied with...
  10. My $61 Workbench- Wood & Vises incl

    I actually finished this project about a year ago and have started this upload about 3 times. The title is quite literally true. The vises are nearly all of the cost… a scaffold jack screw (ala Dema) leg vise ($26) and a veneer press screw wagon vise ($15). All of the Lumber used for the build...
  11. Finishing
    My wife and I are doing a palletwood accent wall in our house. We are going to do around 60 boards (around 90 sq ft). (1 face, both edges and ends). We do realize the wood be blotchy, which my wife thinks is fine since it is rough pallet wood already. Also, I happen to have an Earlex 5500...
1-11 of 11 Results
Top