LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 248 Results
  1. Projects Dog Bed

    I built this dog bed to help me with my recovery from a TBI. As such, as long as the outcome was somewhat close to the original intent, I would be happy with the results. The Chief Inspector and I are both happy with the results. I knew that I was going to be using my plough plane and making...
  2. Euro pallet coasters

    Pallet coaster made of pallet wood - ofcourse, finish water based laquer. Packed as set of six pieces for sale. It would be better to make standard American pallet because it has more squared shape, but Europallet is more recognazible here, although it has 20 pieces. Dimension ratio is 1:10, so...
  3. How to make an Up-Cycled Pallet wood Sliding Barn Door

    My kids are avid gamers, and since we moved in to our house they have had their gaming rigs setup in a finished portion of our basement. The problem was that the basement had be modestly finished with simulated wood (read ugly) paneling and the bi-fold door that separated the space from the...
  4. Family Name Crossword Wall Art made from pallet wood

    So as a new/noob woodworker, I have been using Pallet wood for my projects. I had a couple people request these Crossword/Scrabble wall art with their family names so I tried it out with pallet wood. Hand painted letters by paint pen. I learned a lot and spent a lot of hours using the orbital...
  5. Pallet Chevon "Martini Bar" Wall Art Piece

    EDIT: Holy cow we made it to the Daily Top 3! Thanks everyone - make sure you check out the full video build here: This community is truly amazing. I think a few of you saw my first post yesterday - a butcher block desk that I could have been more thrilled to share with the world and your...
  6. Wall Decoration

    I wanted to add some decorations to my house so I came up with this project. I used pallet wood and cleaned it up well. It is hung on the wall with a French cleat on the back side. I used rustic tin cutouts for the trees, snow flakes, and animals. Obviously this is a seasonal piece and will...
  7. That's no moon!

    Quick pallet wood project for the boss. When I surprise her with stuff like this it gets me more time in the shop!! I know, before anyone starts, it is the second Death Star and that line refers to the first one. I think the second one just looks cooler!
  8. Pallet Wood Sled... In 30 Minutes!

    Hello All, Well a snow storm decided to dump nearly a foot of snow on my home so I got the itch to show my daughter how to make a sled out of wood! Considering the fact that this was for outdoor snow use, I used pallet wood to construct the frame for this sled, we then applied some wax to...
  9. Wine Rack from Pallet Wood

    A friend of mine showed me some wine racks that were made from old pallets. This is my interpretation. I do think it could look very nice if it were made from nice wood, but some people - my wife included - prefer the rustic look, and it was cheaper this way! "Wine Tasting" was engraved on the...
  10. Ribbon tissue box

    Last project in series of tissue boxes. It's pallet wood project as previous boxes. First time I tried ribbons - not my best shot, but I learned a lot. I didn't use template for ribbons, I drew them free hand and cut on scroll saw, so they are slightly different. Ribbons are mix of walnut, beech...
  11. Corner Table

    Last year my parents got a pair of new arm chairs, but they way they had them positioned with one another and against the wall, left an awkward triangle shaped gap between them. They picked up a cheap particle board table that really didn't fit from Kmart and hinted maybe I'd someday make...
  12. String Art

    Over the last few months I've been doing a lot of string art working my way through my huge stack of "pallet wood" Red Sox #1 - Hickory inner section with a jatoba base path. Put together with pocket screws and glue and finished with gloss lacquer LL - All of my "pallet wood" was all collected...
  13. First Palm box

    I didn't get any photo's during the process. These are a couple of the shelacing and the a few angles of the finished box. This one wasn't sanded down as much as my second one is getting. It has a couple of great character knotts in it. The one in the lid would push all the way through, but I...
  14. Primitive/Rustic Folk Art Boxes

    "Under the Clouds;" "Cherries" and "Watermelon" Primitive Folik Art Boxes- a perfect place to store pens/pencils; kitchen utensils; picnic utensils; art supplies; toilet paper; cosmetics and just about anything else you can think of! ;) Dimensions are approximately 7inches by 7 inches by 6...
  15. A Trio of Beer Crates

    So, I brew my own beer and up until now I simply stored my little gems on a shelf system in my basement. A month or so ago, my brother asked me to supply his "Oktoberfest Party" with around six gallons of assorted beer. That wasn't too much of a problem as I love the process of brewing! What...
  16. Jack Daniels Lamp

    The wood work on this one wasn't over complicated but it was a fun project anyway. As you can see, this is a lamp made from a Jack Daniels bottle that was frosted on the inside. The neck of the bottle was from an old water supply line for a concrete wash tub from the 1950's. The copper had...
  17. BOLT BOX

    My grandson Nick got a Meccano set for Christmas and we build a airplane from it and this is the idea that evolved from this . A box with sliding lid made from pallet wood and scraps left over from projects . The socket head cap bolts are threaded in the box with a standard metal tap and hold it...
  18. Not a Pallet Wood Wall

    Not a Pallet Wood Wall….. So, my wife wanted a pallet wood wall. Ugh. I wasn't excited about this for a couple reasons. First is the wood quality. You don't know what species of wood you'll get and you don't know how dirty it is. Plus there's always a chance for metal, nails or staples to be...
  19. BOLT BOX ( revised box )

    This is the revised BOLT BOX I reworked this morning adding the MECCANO bars . Gene ( VIPOND 33 ) thought it needed a little more of a treatment, like a row of holes to make it show more its purpose and I totally agree with him and this is what I came up with . Kiefer
1-20 of 248 Results
Top