LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 55 Results
  1. Simple Box`

    Here is a very simple box constructed of "paduk and cherry", it is for our neighbor as a birthday gift. Forgive the lighting as my camera is not the best. My theme for the box is called the "Praying Hands Box".
  2. Mahogany and Paduk Humidor

    Mahogany with Paduk humidor. I am only an occasional cigar smoker…5-6 times a year, mostly on vacation or visiting friends for the weekend. So I have no need for a humidor to keep a large "inventory" of cigars fresh all the time…but I do like specific brands and don't always trust that I can...
  3. Jewelry Box

    Christmas gift for my daughter. Wood: paduk & wenge. Piano hinge for the lift-top. Size 18"w x12"h x6"d. this is the 3rd jewelry box I did as a challenge from my wife. Sides open for chains.
  4. Wall Clock

    This is a wall clock i made a few years ago. It's made of paduk, yellowheart and walnut
  5. Ice Cream Scoop

    I actually found some time to turn some Christmas presents before it was to late!! Main wood is paduk. Inlay is 1/16" maple sandwiched between two 1/32" black dyed veneers. The ellipse is cut on a table saw sled at 25 degrees. I don't cut all the way through the blank so I have some alignment...
  6. End Grain Cutting Boards - Take 1

    Parents requested some cutting board but wanted a more high end thicked board. These are all made of Paduk and Beli.
  7. Music stand

    I made this music stand for my son. Most of it came out of my scrap box, the little parts. The frame is .
  8. Minimalist mixed end grain chess board

    I've seen this type of end grain chess board around and decided to try my hand at it. I didn't make the chess pieces…they're from the Frank Lloyd Wright Collection. Board is 14" square. Wood used for light squares: maple, ash, white oak, beech, yellowheart. Wood used for dark squares...
  9. Marking Gauge... Almost

    I received Tool-Making Projects for Joinery and Woodworking: A Yankee Craftsman's Practical Methods by Steve A Olesin for Christmas this year (I would have linked to the authors site but he died in 2006). I read the introduction and took a look at the first project, a marking gauge! I was...
  10. Kinetic wooden face utilizing magnetic suspension

    This magnetically suspended wooden face is an original sculpture I finished in November 2013.. As with all of my sculptures, I utilize magnetic suspension to keep the pieces afloat. Magnetic suspension of independent forms that together form an complete object, is a kinetic art technique that I...
  11. Lazy Liz

    Once again, my inspiration comes from a woman at work named Liz. This time she requested a lazy susan for her large dining room table. Measures 16" in diameter and made from (center on out): yellowheart, paduk, maple, walnut, paduk, purpleheart, maple. Lessons learned: I had to get creative...
  12. Alice wonderland cutting boards and some stripes

    The 2 large boards are built with cherry, walnut and purple heart We built these a few months ago, but was not happy just the mineral oil finish, it made the purple heart really brown really close to the walnut )-: I finally decided to try Watco butcher block finish, it actually builds a...
  13. Wood Torus

    Hi, all. Long time lurker, first-time poster. This is a wood torus I made a couple of years back, It's 350+ segments, with 7 species of wood. Walnut, Zebrano, Mahogany, Purpleheart, Paduk, Oak, Maple. It's about 11" diameter. It was turned on a Jet 1221 lathe, using mid-size carbide set...
  14. Raised Square Chess Board

    Paduk with Curly Maple and Cherry squares. 14"x14". Squares are 1.5". 3 coats satin Poly. The design caused a couple of assembly challenges. The biggest two were how to align squares to each other and then how to clamp them individually during glue up. The indexing proved relatively simple to...
  15. All sorts of things here...

    Here are a few projects. 1. Maple and Mahogany Cutting Board Set: 15.5" x 11" cutting board with a 7.75" x 7.25" cheese/fruit board. Both just shy of 1.5" thick. Finished with butcher block finish by the Michigan Maple Block Co. 2. Afromosia Coasters: 4" x 4" x .5" with a grooved top. 3 coats...
  16. Xylophone

    This xylophone was supposed to be a two-weekend project but it turned out spanning across 2-3 months as shop time became very scarce. This is anything but fine woodworking as the resonator box is made of butt-joined and nailed plywood. The bars are made of Paduk and tuning them was actually...
  17. Seam Ripper/s

    From left to right Oak/Paduk, Redheart/Yellowheart, Zebra/Paduk, and Maple/Walnut. I made 3 of these for my sister and her stitchin friends, and the 4th was a bonus for the wife-ee. inerds are a large and small stitch ripper, they store in the tubes as you can see, from Penn State Ind. wood...
  18. Birdseye Maple Flag Case

    First off this was a project I had hoped never to have to do in my life. It is the case that will hold the flag that draped the coffin of a long time friend and boss but more friend then boss and a former Marine and vietnam Vet. It is made from Birddseye maple that i hand selected from the...
  19. Small Segmented Bowl

    Small segmented bowl (#7), Walnut, Paduk and Maple, 2.25" Tall, 2.25" diameter, 184 pieces. This was a fun project to do. On to the next project. Thanks for looking.
  20. Segmented Bowl

    Turned this simple style bowl today. The bowl is made of 6 stacked ring made up of 12 pieces in each ring consisiting of walnut, maple and paduk. 5" tall and 5" diameter at the top. Thanks.
1-20 of 55 Results
Top