LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Projects handrail where there was none now a beauty

    Hey Lumberjocks. Just wanted to post my latest project. Walnut and Paduck handrail. The horizontal slats are 3/16 metals flat stock. Custom made the posts out of walnut from Barrington hardwoods, anchoring was the challenge as I did not want any movement of the post once completed. I did all the...
  2. Cutting board

    I found some very nice pieces of wood in my stash, and made another cutting board. This 12×18 x 1 1/2 CB is made of Paduck,Purpleheart, Sugar Maple,Bubinga, White Limba, Shedua. Finished with Mineral oil/beeswax.
  3. Design by Music

    I was asked by a woman to design a Cheese/Breadboard to the music of the band "Train" and this is what I came up with. Their music is honest, deep and some references to space, so the Black Walnut reminds me of the solar system and the different colors of the type of music in their songs. It is...
  4. First cutting board I am selling

    As you can see, the board is made from walnut,maple,paduck,purpleheart and yellowheart. I glued enough wood to make a additional smaller version. I used the same technique as always assembling the board (titebond 3 glue, cutting the layers and flipping every other layer and regluing, sealing...
  5. Edge grain cutting board number 1

    I just finished this for my niece and her husband who just bought a house in New York City. I made it from leftover pieces of Anigre, European beech, Bubinga, maple, paduck, yellowheart, walnut, Macawood,white oak. It measure's 12" x 18" x 1-3/4. I cut the sides at a 15 deg angle for a different...
  6. Tornado fund raiser donation

    Made this CB to help the Tornado fundraiser. The pattern kind of reflects the disarray that the tornado caused this area. It is made up of Black Walnut, Paduck, Shedua,Yellowheart,European Beech,Purpleheart,Marblewood, Santos Mahogany, Goncalo Alves,Bubinga,Bloodwood. I used salad bowl finish...
  7. Cutting Boards

    I am still building up my depleted inventory. I decided to try making an couple of edge grain CB's for variety. One is 12×18-1/2×1-5/8 made with Santos Mahogany, American elm, White Ash, Paduck, Flaked Oak, Shedua, Lyptus, Bocote. The other is 12×12 x 1-3/4 made with Paduck, Shedua, Sugar Maple...
  8. Commissioned Cutting Board

    Someone at the auction asked me to make them a Cutting Board with some color. This is the design I came up with; it is made from Paduck, Black Walnut, Hard Maple, Yellowheart, Purpleheart, and Hickory. It is 12×12 x 1-5/8 thk and sealed with salad bowl finish and finished with mineral...
  9. Second church cb makeover

    This is the second cutting board I found at the church fair. I cut up the walnut and added european beech, hard maple, purpleheart, paduck, white oak and yellowheart to the aged walnut. I think it jazzed it up a bit.
  10. Testing my patience Cutting Board

    My wife's cousin wanted me to make her a CB, except she couldn't makeup her mind. She wanted a 12" x 12"x 3/4 thk CB with rubber feet and brown woods(first two pictures), so I made this one, but she thought it was too small, so she wanted a 12"x 14" x 1-1/4 thk with colored woods, so here is the...
  11. Cheeseboards

    I had some leftover wood from my last two CB's so I made two cheeseboards. The one on the left is made from Paduck, Black Walnut, Hard Maple, Yellowheart, Purpleheart, and Hickory. The handles are made from Purpleheart. It is 12 × 8×1-5/8 thk and sealed with salad bowl finish and finished with...
  12. Italian Cutting Board

    My brother-in-law's girlfriend is an Italian chef, and wanted me to make her a cutting board to match her Italian kitchen, is this is what I came up with (she picked the woods). It is made from Black Walnut, Sugar Maple, Paduck, Canarywood, Purpleheart, Yellowheart, Cherry. It is 19" x 12-1/4" x...
  13. Another Keepsake/Document Box

    This is another Keepsake Box for one of the Grandaughters and it will be given as a gift this Christmas. The box measures 360mm x 250mm x110mm high and is made from Australian Rosewood and finished with Scandavian oil and then waxed. The lid insert is bookmatched English Elm Burr and all the...
    box
  14. Quilt Cutting Board

    I had some scrap pieces of wood and decided to cut, plane, glue; repeat a few more times and this is what came out. It is 11" x 17" x 1-1/2 thk and made from Black Walnut, Sugar Maple, Shedua, Yellowheart, Macawood, Purpleheart, Paduck, Chestnut and Hickory. Thanks for viewing. -don
  15. Wine Holder

    I had a neighbor come over on Friday asking if I could make a four bottle wine holder for a wedding on Saturday. I told her I would come up with something. I used scrap pieces from the bin; Yellowheart, Paduck, Purpleheart, Canarywood, Black Locust, Sugar maple, Poplar. it took me about two...
  16. Thank you Cutting Board

    I wanted to make a CB for the surgeon and his assistant for getting me stabilized so I can go back to working in the shop again. This CB is for the assistant Susan. It is 15" x 11" x 1-1/2 and made from Black Walnut, Sugar Maple, Paduck, Marblewood, Hickory, Lyptus, Canarywood, Purpleheart...
  17. Thank you Cutting Board

    I wanted to make a CB for the surgeon and his assistant for getting me stabilized so I can go back to working in the shop again. This CB is for the assistant Susan. It is 15" x 11" x 1-1/2 and made from Black Walnut, Sugar Maple, Paduck, Marblewood, Hickory, Lyptus, Canarywood, Purpleheart...
  18. Cutting Board for geologist

    Friends son graduated with degree in geology, so I made this CB trying to make it look like something a geologist would see in their discoveries. I bookmatched the hickory, lyptus and paduck. It also has black walnut, hard maple, marblewood and canarywood. I didn't want to go to wild on the...
  19. Dulcitar/Strumstick

    My brother used to play guitar, but now no longer has the time to maintain his skills. I found these "Strumstick" guitars online that are designed in a way so that no matter what fret your finger is on, you are always in the same scale so all the notes work together. I gathered as much info as...
  20. A little Thank You

    I made this CB as a thank you to a neighber for taking care of my property while I was sick. Its made from Black Walnut, Hard Maple, Paduck, Shedua, Yellowheart with Bolivian rosewood feet. It is 12×12 x 1-5/8. Sealed with salad bowl finish and soaked over night in mineral oil/beeswax. I also...
1-20 of 30 Results
Top