LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Engineered Lumber Bowl

    One of the guys in my turning club got some engineered lumber from his son-in-law. This bowl measures 4 3/4" in diameter and is 2 1/4" tall. Finish is 5 coats of polyurethane. This stuff dulls tools in a hurry and throws off a lot of dust, so sharpen up and turn on your dust collector. It also...
  2. Power Tools, Hardware and Accessories
    I bought a JJ-6CS jointer and need an operator's manual for it. Anybody have one that they would scan and email a PDF to a fellow woodworker? Thanks!!!!!
  3. Power Tools, Hardware and Accessories
    One of my neighbors was moving and he gave me a wood shaper. It was made by King Feng Fu Machinery in Taiwan; probably in the 1980's. It is a model KSP-3 and it uses bits that have a 1/2 inch bore and runs great. Unfortunately, that's about where my knowledge ends. He didn't have any of the...
  4. Power Tools, Hardware and Accessories
    Would anyone know where i might find an owner's manual for a Dayton model 2AC29D 18" band saw?
  5. Power Tools, Hardware and Accessories
    This is a wanted posting for a 1984 Skil circular saw instruction manual, for models 534, 574, 576 and 559. Reason I'm making this post: I have a Skilsaw model 576 type 4 7-1/4" circular saw, with date code 1HKZ1, which means a manufacturing date of 12/83 according to a reply I received from...
1-5 of 5 Results
Top