LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Oval crib

    I made this crib for my first daughter. I had it completed when she turned 3 months old. My wife and I saw an oval baby crib online and they wanted $1,000 for it. Well, we all know we can make it for much less. After a quick search online, we managed to find the oval mattress for $187 so we...
  2. End grain oval of circles cutting board

    This was a long-term project. Here's how I made it. 1. Use lathe to make round stuff. 2. Cut into 2 inch slabs. 3. Glue in a mostly-symmetrical pattern. 4. Drill holes symmetrically where there were gaps and fill them with more round stuff from the lathe. 5. Repeat 1 through 4. A lot. 6...
  3. Wooden box

    This is my beautiful handcrafted oval shaped wooden box. Special thanks to Mr. Santucci for supplying the wood.
  4. Hat Making Tool Custom Shape Crown Hat Block Set Long Oval Shape Cowboy Western Hats

    Custom Shaping of Long Oval Shaped Crown Blocks This is a project I did for a custom hat making shop in Texas. This is a "Crown Block", used to do the preliminary shaping of the felt hat body into the shape of a head. I make several other tools that are used for the shaping and cutting, etc...
  5. Wooden Hair Clips

    First, I started by re-sawing some cutoffs and turning blocks I had around the shop. This was mulberry, walnut, sycamore, pine and some dogwood. I passed each piece through the planer to give it a good gluing surface. Then arranged the pieces and glued them together. After the glue dried I...
  6. Carvewright box experiment

    This box, while it is certainly not anything to be proud of, has really excited me! I used a single plain, non nondescript piece of Pine measuring 3/4" x 5 1/2" x 24". I have a Carvewright machine, which is a entry level CNC machine. My goal was to see if I could design a box in the Designer...
  7. Oval Clocks Mahogany or Red Oak

    I made two larger versons of these clocks for a customer, they were overall 12 inches by about 8 inches. These are 9 by 6. The darker one is made of Mahogany and the lighter one Red Oak. I got the clock movements from http://www.theisenclock.com
  8. FRENCH OVAL

    I thought I post this because I never see anybody using this inexpensive tool . The French curve is one drawing instrument that has many uses in the shop and I could not do without them and it sure beats drawing a curve free hand or using things like a roll of tape or bent stick ETC. to arrive...
  9. Oval Band Saw Box in Four Woods

    January, 2010-Most of my inspiration for band saw boxes has come from books. I was inspired to make this one from Donna Menke's book, which I highly recommend. I started with a glue-up of four different woods. The top is walnut, then poplar. I do not know what the bottom two woods are. My...
  10. Yin and Yang Inspired Shaker Oval Box

    Inspired from the thoughts of Yin and Yang. this box is double fingered with 2 woods joined together and top and bottom having opposite woods as well. Black Walnut and Bird's Eye Maple.
  11. Work in Progress (Horse's head in oval)

    I like to do 'em big. This one is a little over 2 1/2 feet tall by 21 inches wide. I decided to make the oval border thicker than shown in my original pattern.
  12. CNC meets OVAL

    After laminating several different strips of timber… Myrtle, Maple, Rosewood, PurpleHeart, and Walnut… I stepped over to my new CNC router and using Aspire 4 3D software drew an oval… I then offset another oval 30 mm A toolpath was created to route a juice groove on the inside oval. A ball...
  13. Oval coffee table

    This is a coffee table that I built this past winter.
  14. Cherry/Walnut Blanket Chest

    I made this out of cherry plywood and solid wood, with walnut trim. The inside of the box and the drawer bottom is veneered with aromatic cedar (smells really nice!). The box is joined by biscuits, and the corner pieces are walnut with cherry plugs. The top is cherry plywood with a walnut...
  15. Round Nutcracker

    This has been on a friend's mantle for some years. It was my first try at this shape, made of Green Ash, Manitoba Maple, Box Elder..take your pick. As has been discussed elswhere, it faded in the light over time., when I made it there were very distinct red accents, lines and swirls in the...
  16. Oval Tambour Desk

    This desk is a member of a lineage that has persevered since the late 70's. It is made with plain figure White Hard Maple and Birdseye maple. It is 40 inches wide and 28 inches deep. Closed up it is 39 inches tall and open it is around 50 inches tall. While showing last year's desk I often...
  17. Bowl

    Padauk
  18. Jellyfish Table

    ---------------------------------------------------- FOR MORE INFORMATION PLEASE VISIT MY WEBSITE: blakeweber.us ---------------------------------------------------- This project was a commissioned by a client who wanted a table built specifically for a "Jellyfish Lamp" handmade by another...
  19. Designing Woodworking Projects
    Hi folks - I am looking for plans for an oval coffee table (hence the title! ;D ) and have found a couple, but they are arts & craft style, and I'm looking for something else. It will go into a room with dark paneling (it's a commission piece, what can I say?), a white brick fireplace wall, and...
  20. Safety in the Woodworking Shop
    My wife, son and I went yesterday to visit our former Pastor for Christmas in upstate NY. Well, it wasn't without an event. After visiting for a couple of hours my son and I went upstairs to fix her computer. We were working for about a hour when my wife and the Pastor came up to see our...
1-20 of 26 Results
Top