Search Results for ‘out feed table’

Well I picked up a cabimet saw this winter and it seems like I am spending more time working on "projects" for the saw in order to work on a project than working on real projects. I started with a 32"x72" folding outfeed table that doubles as a downdraft table with a 4" dust collection port on...

April 22, 2012 Hello Everyone - Got a JET 16-32 drum sander and thought about buying the JET extension tables. However, my shop is getting crowded and the extension tables would take up valuable space. Instead I decided to make foldable extension tables as shown in the photo above from scraps...

I've alway's used this pipe clamp system to level my catch table, then I came across Ron Paulke and added the shelf underneath today. Don't get me wrong, I'm not comparing this to the quality and genius of Ron Paulke's stuff, but for right now, in about 5 minutes… I love it! Sweet upgrayedd.

35 hours later and now I have me a nice and well needed work bench. I saw this design on the North Carolina Woodworking forum page (my Thanks to Ken for posting his design). There were no plans that I could see but I thought I could work this out with the three photos that were posted by Ken...

For quite a while I've wondered if storing my clamps under my workbench would be more efficient - both from a space and availability perspective. Needing an outfeed table for my table saw gave me an opportunity to find out. It is a big success. I took a lot of inspiration from Steve Johnson at...

this is my first out feed table.I thought it would be big enough? and it is for now. but i will be building my self another one. later on down the road. to fit the length of my table saw. and it will be bigger and better.i have learned from my first one. not what to do and to do table is made...

I built this table mostly as an outfeed table for my table saw. But as the build progressed I added a few feature: 1. torsion box assembly for the top 2. MFT style top with 20mm holes (I used the PARF system sold by LeeValey and reviewed here http://lumberjocks.com/reviews/10450) 3. 80/20...

This project is finally complete. I've been using this out feed table without the storage drawer cabinet for some time now. I had a slew of smaller projects for family and friends that trumped getting this done. My own design, but took cues from other style benches. I liked having the open...

Ok…..here it is finished for now. It went together perfectly, and came out real nice. I am impressed with this design..I had my doubts as to how sturdy it would be… but all those are out the window….this thing is going to make a great assembly table as well. Its rock solid and rolls beautifully...

I just finished doing some upgrades to my Ridgid 3650 Table Saw after getting a lot of good ideas from people's post on Lj and the Ridgid form. I added an Out feed table suspended by 1" aluminum angle. Using all thread and t nuts to level it. Built in a router table with miter gauge track and...

This was inspired by a Marc Spagnuolo video (Episode 30). Thanks Marc! I recently bought a Delta 36-725 table saw and needed a new out-feed table. My old out-feed table was made from a half sheet of 1" Birch plywood. Not wanting to waste anything, I disassembled the old table That used the...

My wife was generous and bought me a Lathe for Christmas. All this time I thought I was spending to much time in the shop, guess I was not spending enough….I needed a new table to hold the lathe, so I decided to make a table that could also be used for as an out feed table been using roller...

So I had an old assembly/work table that was very tall (for my Sasquatch sized body). I have a project coming up (kitchen and some bath cabinets) that will require working with plywood (yuck). Plywood really requires an out feed table, so I decided to convert my assembly table to a...

This was quite a project. I just finished it about a year after starting. The top, legs, and stringers are all made from birch plywood that I laminated together. The edges are brazilian cherry, and the drawer fronts & doors are birdseye maple. I made a slideshow of the build if anyone is...

This is a project I call Jet 2.0. I bought this tablesaw from a local cabinet company here in Wichita Kansas that had upgraded to Sawstop machines. I pondered over that very same idea for the last two or three months until stumbling on this machine on craigslist. Paid 1100 for it although it may...

Well, just like everyone else I needed an outfeed table for my table saw. I spent a lot of time looking at a lot of them on Lumberjocks and all over the internet. I needed to be able to fold it down when I put the saw up against the wall so it had to be folding. I really liked the idea of the...

My work bench always seems to accumulate tools and other miscellaneous clutter while I am working in my shop. I also decided that my roller stand just wasn't enough support when cutting a sheet of plywood so I decided to build a dual purpose assembly table that was movable, sturdy and large...

I became obsessed with the Rockler clamping tables by seeing them everyday in the magazines they send me! They wanted way to much money for theirs, so I decided to make one out of a small table I made awhile ago and was due for a new hardwood surface. The table acted as an extended out feed...