LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 148 Results
  1. shop cabinet

    We have been working on organizing the work shop. So Darryl made a nice cabinet that hold the bigger tools in the deep bottom drawers and the other things in the top. The dividers can be arranged also. I made a towel rack too. Plan on putting these around the shop. Sort of like looking for a...
  2. Sandpaper Organizer

    I just got back from vacation a few days ago and I felt like messing around in the shop today. I decided to build a sandpaper organizer that I've been meaning to build for some time now. I started designing it in sketchup around noon today, and 10 hours later I have it completed. You can see...
  3. Sawdust Chronicles Desk Organizer

    Here is my submission for the desk organizer build challenge from the Sawdust Chronicles. I designed it to be used in a specific place on my desk at work. I built this organizer mostly out of lowly pine boards (1x's and 2x's) that I had lying around the shop. I did buy an 8' 1×10 and some...
  4. Shop Project - Organizer Cabinet

    I have wanted to do this project for awhile. I try to be organized by having these Stanley 10-Compartment Professional Deep Organizers for screws, bolts, hinges, etc… The problem is they all stacked on top of each other and I always seemed a need a part or screw in the organizer stacked on the...
  5. Scroll Saw Blade Organizer

    Here is something I worked up a while back to hold our scroll saw blades… The top is a 1x and the bottom is a 2x pine with 1/4" plywood sides. I drilled the top and bottom at the same time by using double sided tape to hold them together while I drilled the holes…
  6. Drill Accessory Box

    A quick box to help organize. I couldn't help experimenting a little.
  7. Key Organizer

    My Key Organizer A very nice useful and easy project to do. From design to build up it took me a couple of hours. Made out of Red Hard Wood and Alucopan (Aluminium Composite Material - Plastic laminated on both faces with 1mm aluminium plates) laminated together with 5 mins epoxy. Sanded up to...
  8. Nuts/bolts/screw organizer

    I updated this posting with additional photos. Hopefully this will provide a better idea of how is swings in and out and how it's mounted. Mitch
  9. Card Scraper Holder

    Finally banged one out in a day :-) I took some scrap ply, marked out my kerf lines on 1/2" centers, and ran 'em through with the radial arm saw (neat !). Then, I did an inlay of Wenge, or something, at the front and at the back. Then … I used my dado router jig, and carved out about 1/3" of...
  10. Oak night stand

    I made this oak night stand to use beside my bed. The sides, back and bottom are made of plywood. Everything else is solid oak. I used poly for the finish.
  11. No Thank You Borg...

    My old plastic Fastener Organizers finally gave up the ghost. Replacements at "The Borg" would have run about $100.00. Forget that ! For about half that much, and a little ingenuity, I almost doubled my capacity and now have a more organized arrangement which works perfectly for me. Everything...
  12. Ultra Easy Wrench Rack

    No measuring required. I set my kerfmaker so that each slot is 1/16 larger than it's corresponding wrench shaft. The spaces between the slots were set by using the closed end of each wrench. From the side, you can see the V-dado going across the top. Initially, the "V" angle was shallow but...
  13. Closet Organizer

    I made this closet organizer thingy out of birch ply and pine, birch ply drawer boxes and shelves, added some flutes on the uprights of the upper shelves, finished wit of with some MDF mouldings, theres 4 hanger rods installed now as well, just need to add some bi-folds
  14. Knitting Box

    Knitting box I made for my girlfriend. Special thanks to Steve Ramsey for his video on Woodworking for Mere Mortals! He was right when he said give it a lot of thought and it'll all come together in the end. Lesson learned on this project was take my time and don't rush...
  15. Small tool organizer for midi lathe back plate

    We recently redid our backyard, and bought new patio furniture. I salvaged a bunch of wood from the old, inexpensive meranti furniture we had before, and have been finding it useful for small shop projects and fixtures. I needed a better place to put the levers, allen wrenches, and drive centers...
  16. Tool Cabinet Increases Storage By 350 Percent ••

    Jan 4, 2013 -- (Updated June 3, 2018)-SCROLL DOWN TO SEE MORE PICTURES ================================================= SPECIAL OFFER (as of June 3, 2018) With over 92,500 views and over 500 FAVORITES, this has been my most popular posting. If anyone is planning on building a tool cabinet...
  17. Jewelry Rack

    Tried to cover all bases with this one, necklaces, bracelets, rings, earrings, chains, and three shelves for small boxes or items. All Spanish cedar, the heart design is lapizlazuli inlaid into the carved shape. Quite popular so far, we´ll see….
  18. His & Hers Magazine Caddies

    The Wife and I have long had some kind of basket on either side of our loveseat to hold our iPads, magazines, catalogs, tissue, and what-not. A while back, my faux leather basket exploded, spewing candy wrappers and unread junk mail everywhere. Tragic. We looked high and low for replacements...
  19. CUSTOM TOOL HOLDERS •

    Jan 6, 2013 As a followup to the Tool Storage Cabinet, I thought Iʻd share what I learned about making custom tool holders. Most of the following pictures show the holder on the left and the tool in the holder on the right. If you want you can save photos to your computer for future reference...
  20. Organizer

    Not the most elegant project but purpose-built. We had a nook between a wall and the brick fireplace that had become the dumping grounds for anything that didn't have a home - dog snacks, kid's homework, errant electronic devices, cords, etc. So, I built this organizer using really simple kreg...
1-20 of 148 Results
Top