Search Results for ‘orbital’
Discussions Showcase Albums Media Media Comments Tags Marketplace
1-19 of
19 Results
Search Tags
-
Orbital Sander Stand/holster
This is all about function rather than form. It ain't pretty, but it's version 1.0 I needed a stand/holster to hold the orbital as it spun down, rather than me standing there holding it for all those seconds. I came up with this, using scrap 1/2" oak and 5/8" oak dowels. The right dowel is...-
GSgtRich
-
-
The taming of the table.
Just a while back on here I asked advice about restoring my 100+ year old dining table that belonged to my 2x great grandmother. The table was put into storage after it had been used as a saw horse and had three skill saw cuts put into the top. Two cuts across grain and one with the grain... -
Crown Moulding Jewelry Box from last christmass
Here is the Crown Moulding box that I made for my step daughter in california. It was for Christmass last year, but I didn't get a picture of it before it left. All mitered corners, including the top. Just added a piece of scrap in the center to fill in. Used the natural mitered edge of the...-
Gscrappy
-
-
Kitchen Island Cart
This is my very first woodworking project. I completed it at my brother-in-law's house using his table saw, circular saw, and router. Since this photo was taken, I added hardware to the drawer pulls and seasoned the butcher block top. The top is 31 cuts of whitewood, the base is whitewood...-
Gglenwmr
-
-
Cherry bed
This is an arts & crafts/mission style bed out of cherry. These nightstands were built to match. I like the look of the cherry and particularly the change in color and pattern from heart to sapwood. I haven't had any issues using both. Were I to do it over, I'd match all of the slats from...-
Gedreher
-
-
-
FinishingHello community, I recently embarked on my first woodworking project: a simply farmhouse rustic style table from reclaimed coastal redwood. The great news, the table turned out exactly as I wanted. The bad news, I may have made a mistake with the finish. First I sanded the tabletop using 80...
- 12
- 1K
-
Marketplace ClassifiedsI am selling off 2 small RO sanders. One is my Mirka Ceros 3 inch electric (with dust collection). Barely used, I haven't been using it as much as I anticipated, so I'm hoping someone else can make better use of it! This model was made for the North American market and uses a standard wall...
- 0
- 3K
-
Power Tools, Hardware and AccessoriesI'm looking into purchasing a 6" r.o. sander for various projects. The Ridgid 6 caught my eye for reasons of price and the good luck I have had with the brand in the past. Budget is up to 200, but looking for an excuse to buy a festool. Any suggestions? experience? Does a 5" diameter hold...
- 7
- 2K
-
Power Tools, Hardware and AccessoriesI'm looking at purchasing a new sander to hook up to my air hose and have stumbled upon a few options that I'm not certain about. The main dilemma I currently am uncertain about is what a "geared planetary motion sander" is and how it differs from a non-geared random orbital sander. Besides...
- 3
- 2K
-
BlogsDustless Sanding (really!): Rigging up your own vacuum system with the Porter Cable Model 333 The hardest dust for me to breathe is the fine stuff that comes out of the orbital sander. I have used the Porter Cable Model 333 for about 10 years now, and have done a lot of sanding with it. I am...
- 7
- 50K
-
decoustudio ·
-
BlogsThe Ultimate Orbital Polisher - Gem Industries Takes on Wood! Artisans of the Valley reviews the Gem Industries Orbital Polisher - a 16lb perfectly balanced 11" random orbital sander. Yes - we said 16 (sixteen) pounds, this is no lightweight class machine, it's a professional grade piece of...
- 0
- 2K
-
EricMSaperstein ·
-
BlogsHow to make Orbital Sander with fan ????? How to make Orbital Sander with fan Not sure if this is worth the trouble, but I found it to be at least a very interesting build and alternative sander !!!
- 4
- 2K
-
steliart ·
-
Power Tools, Hardware and AccessoriesI'm totally new to DIY and have a couple of projects on my to do list - restoring an old painted dresser and painting a formica desk. I think I want some kind of power sander, but I'm not sure what is the most versatile or even appropriate for the jobs at hand. I've done lots of how-to research...
- 12
- 11K
-
Power Tools, Hardware and AccessoriesHey guys- It's this time again. I need a orbital sander! What orbital sander would you recommend guys? Any comments or any chat about which sander is the best is appriciated!
- 33
- 7K
-
Alexandre ·
-
Power Tools, Hardware and AccessoriesDoes anyone have any experience with using a straight line sander in place of a hand planer? I thought this might be an option to help level boards and was interested to see if anyone has given this a try. Thanks in advance for your help!
- 6
- 1K
-
JiuDuffSu ·
-
Power Tools, Hardware and AccessoriesHave a 6 month old RS2E 1/2 sheet sander and about 180 sheets of festool paper, grits 80 through 320 in a Systainer for sale - Works perfectly - $475 takes it with $19 shipping to lower 48 Email [email protected] with any questions! Also posted on...
- 2
- 3K
-
JohnO1955 ·
-
Power Tools, Hardware and AccessoriesHey guys, I bought a porter cable 505 finishing sander used and it seems quite nice, however I have seen plenty of sanding marks in my first big table project. I'm not sure if this is user error, either i was pushing down on the sander or I let it tilt and I etched these sanding lines in the...
- 1
- 1K
1-19 of
19 Results
