LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Fleur De Lis Murphy Bed | Custom

    This is a my Excalibur Murphy bed with a Louisiana Flair. I added a Fleur De Lis to the top corners where I normally add a Rosette. This one completed in August 2010. Wood type: Red Oak Stain: Gunstock by Minwax Finish: Medium Sheen Pre-Catalyzed Lacquer This one did go to New Orleans, but...
  2. Lath Console Table

    I was commissioned to make this table after the client saw another table I built out of lath strips for a design contest (a pic is in the Reader's Gallery of the October issue of Fine Woodworking). Along with the table, he wanted the sort of write-up a gallery would do explaining how the table...
  3. A home for wayward handplanes.

    Had a shelf to sit a few "ready use" planes on. Bad news was a grinder shared the shelf. With the grinder being used, the planes would try to "walk" away. Needed something a little better Had a 7" wide plank of pine, and some other scraps sitting around. Laid out the angle the longest...
  4. Blogs
    Cypress Workbench Let me start with the following disclaimer: "I understand that cypress is not the ideal lumber for a bench top. Please don't try to persuade me to not do this. It has started and there is no turning back." I picked up some 6" x 6" rough cut cypress in Florida. I'm gonna...
  5. Woodworking Skill Share
    I was hoping to make a small project from some native New Orleans lumber. One tree that seems to be a unique choice would be a magnolia. Does anyone have any experience with this lumber? Any potential sources (I didn't see anything on google). Any alternatives (N.O. native trees) that...
  6. Wood & Lumber
    I have 1500 board feet of air dried walnut I am looking to sell. It is all 4/4 and 8/4 graded black walnut with M.C. 10-15 %. E-mail me at [email protected] for pricing. information
1-6 of 6 Results
Top