LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 112 Results
  1. Recent work

    I don't post as often as I should. Here is some recent work. Been experimenting with bookmarks and earrings in addition to the necklaces and boxes I have been making for quite some time. Bookmarks are glued up in blocks and thin strip ripped either on the bandsaw or tablesaw with a thin strip...
  2. Necklace on Zebra Wood scraps- Art Deco

    These pictures are horrible- my camera is a junker- and it doesn't have much zoom power :/ so I apologize for the lack of clarity. Anyway, this is a necklace made on wood scraps (zebra wood) The wood pieces are about 1 1/2 inches long and 1 -1 1/4 for the short ones. The wood is sanded then...
  3. Friction Fit Wooden Jewellery Box

    In this video I will be making this beautiful Jewellery Box, designed for some Cuff Links. This is a simple build and can be made very easily with limited tools! It contains Mitre joints and a cushioned bottom to protect the Jewellery. Please see the full video build on my YouTube channel to see...
  4. necklace pendants

    These necklace pendants were made for my daughter, daughter-n-law, and ex-wife as christmas gifts.The one with the chinese symbol was for my ex, and is made from cocobolo w/sterling silver inlay. The one with the celtic cross was made for my daughter-n-law, it's cocobolo with a mother of pearl...
  5. Owl necklace

    A little practice in carving… or just an excuse for a feather necklace? I accidentally made far more feathers than needed but it was fine because it provided plenty of "test" feathers. Carved in pine. Colored with wood spirit dye in "mahogany" and then lightly sanded for the gradient effect...
  6. Pendant for wife, it was WHITE DAY yesterday!

    White Day is a day celebrated in Japan on March 14, one month after Valentine's Day. In Japan, Valentine's Day is observed by females who present chocolate gifts (either store-bought or handmade), usually to a male, as an expression of love, courtesy or social obligation. On White Day, the...
  7. Spalted Maple Pendants

    These are a handful of spalted maple pendants that I have made as christmas gifts. They are all roughly 2"-2.5" and shaped on my belt sander then hand sanded smooth (the wife helped with that part). The finish is 3 coats of lacquer then a coat of wax. the bails I picked up at a local craft shop...
  8. First Ever Inlay - Wooden Dog Pendants with Gorilla Glue

    I had no idea what I wanted to do for this challenge when I first heard about it. I just knew that I wanted to start participating more in the community so I'd feel more connected and less like a young person cut off from all the usual wild young person activities. I'm pretty new in general to...
  9. Moana Necklace

    This necklace is from the Disney movie Moana. It is made from pine and constructed using the bandsawn box technique, though I used my jigsaw to do the cutting. The top, bottom, and middle sections of the box were glued back together before carving. After carving the rough shape, the two...
  10. Wood twist pendant

    Material: Stabilized bubinga wood Size: 1,77 inch or 45 mm long
  11. Aspen Necklace Holder

    Rack made to hold necklaces. Made from an Aspen I cut down in our yard, dried and preserved with pencil. Glass knobs added and finished w/ danish oil.
  12. Eclectic Necklace

    After messin around with that 10000kt Walnut ring, I made this small necklace from some pen blank cut-offs, all sorts of woods. It's just an assortment of different sized, and colored woods on a piece o rawhide. It could be worn as a bracelet also. Thnx for lookin. As always, good, bad and/or...
  13. Eclectic Jewelry

    These are a combination of a couple o small things I wanted to share in this contest. The 10000kt Walnut ring has a good companion in this very fine, multi-woods neckace. Thnx for the looks. Any comments appreciated. Good luck to everyone. Ya gotta have fun. :)
  14. Wenge / Resin Wood Necklace Pendants

    A set of wenge and resin necklaces for my wife's boutique clothing store. Cast as a single block and this time using a pressure pot to make the casting as clear as possible to really show off the wenge colors. I split the block with bandsaw and sliced them into individual sizes. Then I used a...
  15. Wood fish hook

    Material: Tigerwood Fish hook - Hei Matau : Represents strength and determination and brings peace, prosperity and good health. Also provides safe journey over water. Finish - waxed with combination of carnauba and beeswax Iize: 1,69 inch or 43 mm long
  16. Sliced Salvage Wood Necklace

    One of my favorite pastimes is digging through Bulky Trash Week piles. I'm always looking for salvageable lumber, stumps and tree limbs. I came across several pieces of diseased wood (pests, fungus, etc). If one cuts it up enough in varying angles, lot of interesting figuring, or rather...
  17. Hickory Disc Pendant

    TRUTH ALERT: I saw this on Pinterest and thought it would be a fairly easy one to pull off. After cutting the initial shape, I used my belt sander upside down to round the outside edge. It was not as easy as I thought because as I rotated toward the center, knuckles hit sanding belt and skin...
  18. Salvaged Wood Necklace #3

    I have enjoyed turning damaged, diseased wood pieces into something beautiful. Here's another example of same. These pieces are unique in that what ever took control of the tree left behind waves, spalting and unexpected changes in the pattern. Many craftsmen can tell the type of wood by its...
  19. Wood Tie

    After debating what to get someone that has everything they need, I got the idea to make them a wooden tie I had seen on this site previously. This is sort of a combination of ideas i found in several online searches. Due to the difficulty in wrapping the gift, I made a box special for this...
  20. Some wooden jewelry I finished

    These are photos of some jewelry I finished for my wife for Christmas. I'd like to take the credit for the glue up but I can't. I was poking around my local Woodcraft money pit and came across this design in a pen plank. With limited time before Christmas I decided to resaw the blank and cut...
1-20 of 112 Results
Top