LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. 1st Drift Wood Project

    I went on vacation in August to Outer Banks, NC and picked up some drift wood while I was there. I decided to just wood burn it, polyurethane it, paste wax it, and hang it on the wall for decoration.
  2. Animated Kangaroo (New Design)

    I finally have some breathing room to post some new designs that are actually one month old. We have some work at my work place that came in. I made this design after talking with Tony who is from the land of "down under". I used the motion from the brontosaurus to simulate a hopping motion...
  3. the chief

    what started as a 9 ft log and carving in below 20 degree temps turned into a super fun task
  4. Patio Beverage Tables

    My wife picked out a couple of square tile pieces and asked (with the authority of a wife) me to make a couple patio beverage tables. This is the end result. They are made for scrap 2×4's and 3/4 inch plywood. Fun to make and inexpensive.
  5. end tables

    These are two end tables I made for my in laws that just finished a house remodel. the wood is peruvian walnut bubinga and lace wood butterflies. They are surprisingly strong it takes my weight siting on them fine.
  6. Cheveron Hall Table

    Yes! I sold this table today from my showroom. This piece is made out of cherry with a birds eye maple apron with cherry inlays wrapping around the apron .I finished it with a hand rubbed oil finish and the piece was made in February of 2012. This table was based on another table that I...
  7. Persimmon Cutting Board

    This is one of my first cutting boards. I found the wood in a small private lumber yard with my dad in North Carolina. Having never heard of this wood I bought a few boards and took a risk. After using it a couple times it is a unique wood that really pops. In fact I think I have one piece...
  8. Marketplace Classifieds
    Pardon me if this is in the wrong area but I am working on a medium sized apartment complex renovation and need a bit of advice. Anyone here local to NC? I need 58 custom table tops & nightstands built for this project. I have all of the AutoCAD files needed. Only things I can find so far is...
  9. Marketplace Classifieds
    This bandsaw came to me recently through a school auction. It is large and very heavy (at least 600lbs) and looks to be pretty complete, it is only missing one door latch but the knobs are all there. The upper and lower guides and tension mechanism all look complete. It has a 1 HP, 3 Phase...
  10. Blogs
    are there any good ones in NC I am in Hickory, NC and am looking for a good woodworking show. I love going to shows and just checking out all the stuff. Does anyone know of any good ones in the area?
  11. Off Topic Coffee Lounge
    This is really happening in Raleigh, NC USA
  12. Blogs
    Relocated to Gibsonville NC I'm back. We decided we were going to relocate to NC to be where the wood is. Well I finally had time to catch up and realized it has been some time since I was on here. So my projects are now on my own blog as well as my website and I have also been active in...
  13. Wood & Lumber
    I have for sale Two Live edge Wild Cherry Slabs these are 4/4 One is 70 inches the other one is 104 inches long. Thye range from 13 inches to 19 inches wide and VERY little Sap wood these are VER Y nice boards. they were cut using a bandsaw mill. I am located in North Carolina. Let me know if...
  14. Marketplace Classifieds
    I am in Hickory, NC and am looking for a good woodworking show. I love going to shows and just checking out all the stuff. Does anyone know of any good ones in the area?
  15. Woodworking Skill Share
    Hello fellow Lumberjocks! I am writing this post in hopes of locating other woodworkers near me that if close enough, could meet up to collaborate/ learn from one another. I live in central-northern North Carolina area. Small town called Roxboro. This is north of Durham by about 30 minutes and...
1-15 of 15 Results