LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 49 Results
  1. Airsoft GoPro mount

    Not long ago I bought an airsoft shotgun, to play a few battles with friends and shot them down, but I didnt had a way to film the actual batle, like and first person shoter game. So I searched for some sort of mount to secure my gopro to the weapon.. Unfortunately I only found mount to smg and...
  2. Gopro wood knuckles mount

    I wanted to think outside of the box, and make a go pro handle diferent than everyone else so after a while I came up with this design. Its easy to grab and has a nice feeling to it. Basically I pick up a piece of hard wood made a few holes with a dremel and give it the rough shape with a file...
  3. Kreg Jig Portable Workstation

    The Kreg Jig is mounted to a small board which nests in the workstation. This workstation gives support to your wood as you work. It contains five storage compartments behind three sliding doors. These compartment store screws, bits, drills, clamps, and the jig itself. It can also house the Kreg...
  4. walnut mount

    I took some liberties with this one. More than I do with most but the client seemed please.
  5. Another Joker Game

    Here is my design of the Joker game that is popular around here. This version has individual boards to match the number of players, in this case up to six. What I set out to do was to make the pivots coaxial with the end marble hole so that the hole to hole spacing is equal no matter how many...
  6. Cell phone tripod mount

    With the lock down in South Africa to prevent the spread of the Covid19 Corona virus we had to think about innovating ways to carry on with Sunday services without gathering people together in a church building. Given that the resources of a small congregation is limited with no budget to buy...
  7. Guitar wall hangers

    I've used wall mounted guitar hangers for years, but every one out there is just so bland and has no character. There was a silver leaf maple tree that had fallen in our yard a few years ago. This is wood from the stump that was left. (I was on a deployment and couldn't get all the wood from...
  8. shield

    this is a shield i made for a friend. made from pine, mount is in the shape of africa. he is going on a hunt there. not sure what he will mount on this. it is about 4 feet tall. little over 2 feet wide.
  9. Scrollsawn Oak Sword Mount

    An older project, built as a going-away gift on behalf of a coworker. The office had gotten him a replica broadsword and I volunteered to build the mount for it. They wanted the heraldic shields on either side and the badge inscribed somehow in the center. This presented me with the unique...
  10. Floating Record Player or turntable Mounts/Platforms in DJ format

    Just another-"Necessity is the mother of…."-thing. My studio/apartment in NYC is low on space so I figured my Technics would get more use if they were floating on the wall, rather, than if in storage. Stand- by for my twist on the Murphy Bed. The surfaces are ply. Structure is mild steel...
  11. European Buck Mount

    I made a simple plaque to display a European buck mount. It is made from some spare oak that my dad cut down and used for trim inside my house about 18 years ago. Basically just made a panel cut out the design on the bandsaw, shaped with spindle sander, and used a 45º router on the edge. Feel...
  12. Bedroom Television Ceiling Mount

    I needed to design & build something that would allow me to mount a small TV & satellite receiver to the ceiling of my bedroom… (you can see more of the process in my blog… http://lumberjocks.com/jocks/Budman/blog/1095 )
  13. Ipod Mount for Tripod

    [Legebla ankaŭ en Esperanto] My wife's school supplied her with an ipod to record the kids doing musical type things as part of New Jersey's Core Curriculum. Among other things, she uses the ipod to record her children's concerts and the annual musical. The children are then shown their...
  14. Peterbilt logging truck

    They are ready! Made this trucks from T and J plans. As always the plans of T and J are time consuming, but fun to do. Before two month ago I never had heard of Peterbilt. The models are for so far I can find of type 379. Correct me when I,m wrong! The total length is about 1 meter ( 40")...
  15. lil guy

    This is the first whitetail I ever killed. I think i was 17. Took him at 97 yds, from the ground. I shoot a .50 muzzleloader with 100gr. I made a crude mount, this is the new one. Just a lil 6 pointer basket rack. But he made some darn good sausage.
  16. A FIRE CHIEF RETIRES - GIFT AXE MOUNT

    Yet another gift that was given to a great chief. pretty self explanitory, I glued up the two boards to highlight the cathedral figuring while at the same time hide the seam with the handle of the axe. I blind mounted the axe by insetting threaded inserts into the handle (which definetly made...
  17. A FIRE CHIEF RETIRES - BELL MOUNT

    This is an Old engine bell that we were able to recover as a gift. I did not have the mounting hardware for the bell, so I had to improvise. I laminated some 2" construction stock for center of the base. on top of that I mounted a 1/2" piece of plywood. I used a drill press to drill through...
  18. The Sandbox

    This is one of those projects that seems to linger and stay on the "to do list". Been wanting to make something like this ever since I started sanding as far as I can remember, but somehow always didn't have the time when I had the materials, or didn't have the materials when I did have the...
  19. Barn Beam Mantel Install

    I bought an old hand hewn ash beam. This was a fairly easy project but thought I'd share the mounting tricks, I didn't buy and brackets, I only used a 2×4 and some screws. More details on my blog: http://www.woodworkingfourdummies.com/blog/barn-beam-mantel-diy Cheers, Ian
  20. Brandon's European deer mount

    Brandon has made several of these mounts, but this one is special. It was made specifically for his grandfather. I helped a little, all the work was done all by Brandon, it looks great, and very well made. It's made of tiger maple, finished with a dark walnut stain. I am very proud of Brandon...
1-20 of 49 Results
Top