LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Christmas Gift

    Message Board and Trivet. After doing some kitchen remodeling I had some left over tile from the backsplash. My wife has a "chicken" theme going on in the kitchen so I ordered some custom hand made tiles from here. I have done a few picture frames but no experience with tile and grout. I...
  2. Message Center / Coat Rack

    I have made several of these Message Centers. I use red oak, and old rail road spikes that I found along the rail road tracks are great for hanging coats and hats on. I also have 2 letter holders on each side. The dry erase boards seem to come in handy and gets lots of use. I use some old...
  3. Magnetic Dry Erase Board

    I built this message board for our school's silent auction. The dry erase board is actually inset into the frame itself. All parts were cut using my crosscut sled and my miter sled that I built recently. I cut down some quarter round I has to smooth the transitions from the board to the frame...
  4. Christmas Present: Walnut Cork Board

    I began this project a couple of years ago, and decided to finish it for a Christmas gift this year. This was built to fit a specific location in a family member's house, just above her desk area, above the counter she uses as a desk and below the cabinets. I decided to take the first couple of...
  5. Primitive, Rustic Chalk board or cork board

    These chalk boards were made from trim Rosettes generously provided to me by my l/j friend Charles (Helluvawreck). The dimensions are approximately 222X24 inches or something like that. :) The side pieces are pine 1X4. A Kreg jig was used to connect the rosettes to the side pieces. The...
  6. Cork board, message board Primitive Rustic made from Repurposed Shutter

    These cork/message/bulletin boards are made from repurposed shutters- donated to me by a neighbor. The frames were made to accept a fabric curtain and did not have a center raised panel installed which made them perfect candidates for bulletin boards. The dimensions are approximately 9 inches...
  7. Power Tools, Hardware and Accessories
    I have been using the 2hp/5 micron/1550cfpm Harbor Freight dust collector for over a year now and love it. But it's really intended to be rolled around the shop and hooked with short lengths of hose. A while back I mounted it in a corner, added a trash can lid cyclone and ran 4" pvc ducts all...
  8. Power Tools, Hardware and Accessories
    http://www.grizzly.com/products/12-1-2-Benchtop-Planer-with-Dust-Collection/G0790 I've been put on the wait list for this new planer that Grizzly has. It's a new model this year and it's not supposed to ship until March 13th. Based on similar models made by other manufacturers it appears to...
1-9 of 9 Results
Top