LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Refinished and made new...

    I built this oak medicine cabinet back in 1993, and my wife asked me to refinish it last week. I sanded it down to bare wood, restained with Minwax Golden Oak, and applied General Finishes Arm-R-Seal Urethane. Not looking to bad now…
  2. Bow Front Medicine Cabinet

    Bow front medicine cabinet with towel bar. Featuring bent lamination doors with knife hinges, Q-sawn white oak, lacewood veneer and walnut accents. My wife asked me to build a medicine cabinet for the bathroom and wanted a towel bar below it. She would have settled for a square box and a store...
  3. Over the toilet medicine cabinet

    Hello, I build this medicine cabinet for our powder room. My wife wanted something there so I found the plans for this cabinet on some Canadian woodworking site somewhere and built it. Once it was built, my wife wanted the doors for the sink cabinet to match, so I built them. It is all made of...
  4. Oak medicine cabinet

    This medicine cabinet is made with a 1×10x8 oak board found on the side of the road. It replaces an 80 year old metal version that is original to the farm house. When I pulled that out of the wall I found hundreds of used razor blades in the wall where they discarded the old blades through a...
  5. A Medecine Cabinet ... the "ad nauseam"

    In the last little while, we at the shop happily made a complete restaurant and bar for a small national chain and all was good, but seven small glass shelves somehow came back, being the wrong size they were. Throw em in the garbage says my boss; well nuh-uh I reply, they're gonna be for my...
  6. Arts & Crafts Style Medicine Cabinet

    This cabinet is made of cherry, cherry veneer plywood for the back, basswood for the chip-carved panels, ambrosia maple for the shelves, and ebony for the knob. In the view from the bottom, you can see that I dated the carcase 2010, but it took me a while to learn to carve the panels. Then...
  7. Medicine Cabinet to go with the Vanity I built

    It has a double bevel mirror. I encluded a pic of the vanity I already posted just to show what it goes with.
  8. Medicine Cabinet 3

    This is a medicine cabinet I made for a customer who wanted to mount it in a small main floor bathroom. the outside dimensions were 8.25" D x 15.25" W x 21" H and the actual outside storage dimensions were 6.75" D x 12.25" W x 19.25" H. The dimension of each cherry shelf was 5.375" D x 11" L...
  9. Medicine Cabinet

    I made this recessed medicine cabinet to replace a big clunky, wall mounted abomination of painted sheet metal and mirrors. I hand picked the curly maple planks from a near by, well timed woodworking show. Having never worked with curly maple before I was surprised by the amount of tension in...
  10. Bathroom Medicine Cabinet

    Made a medicine cabinet out of oak. The outside of the cabinet needed to be rough sawn. The smaller door has lap joints while the mirror door is plywood with the frame attached to it for support for the mirror. Not my favorite piece but the customers were very happy with it.
  11. Bathroom medicine cabinet

    In my previous project, I did the sink vanity and mentioned the medicine cabinet was coming up. It's done and came out OK. You can't see it but the doors a slightly twisted which means they don't perfectly line up with the carcass. All practice for the coming kitchen cabinets! :) The door...
  12. Native American Feather Box for Medicine Squirrel

    Built on commission for a gentleman at our church who happens to be Native American. He asked for a box to hold his eagle feathers used during ceremonies with other tribal members. Made from aromatic red cedar to keep the moths away. Machine cut dovetails from my Porter Cable jig. The handle...
  13. Bathroom Furniture

    This is the story of the parts and pieces of the Throne Room but not the throne. This old house has a tiny little in-house out-house. It serves all the necessary functions but you can't throw a party in there. I hate regular medicine cabinets. They are too narrow and everything I own falls out...
  14. Shaker Bathroom: linen press, medicine cabinet, and vanity

    This is all of the woodwork I did for my remodeled bathroom: a vanity, medicine cabinet, and linen press. I designed everything with a shaker influence, but also some details were made to simply conform with other woodwork around the house. Its all made of red oak with 3 topcoats of General...
  15. Cherry Medicine Cabinet

    This medicine cabinet is part of an ongoing commission (to be posted when completed). The frame and door are constructed of solid florida cherry color enhanced by the application of lye. This is the first time that I have worked with this much cherry before, awesome stuff by the way! The...
  16. Site Help and Suggestions
    I just started putting together this 12" disc sander using a pump motor and the 6" disc from my Delta combination belt/disc sander. The MDF disc is temporarrily held with two 1/4" bolts to be replaced with recessed Allen bolts. I tried using four screws from the back spaced evenly on the outer...
  17. Woodworking Skill Share
    Built this lighted medicine chest back in 2015 Lighted Medicine Chest.
  18. Blogs
    Concept, Milling, and Legs I started a commission for a custom bath vanity a few months ago. I am going to try to blog the process in as much detail as I can remember for anyone that would like to follow along. The project is not quite finished yet and I had been meaning to start the blog ages...
  19. Blogs
    Found CD from old shop in 2000! Hey everyone! I was going thru some old CDs and found stuff from my old shop. Old Shop I used to run a web site MARKSWOODSHOP.COM, and this is some of that old content. It'll take me a bit to get the stuff reformatted and uploaded so stay tuned for further...
  20. Wood & Lumber
    My daughter want to build her son (my grandson) a bed. She has an extra long twin box and mattress and I have to build around that. Thinking about the 4 posts to be of Oak, but is about $30 a 4×4x4 and I'll need 4, plus the rest. Would Douglas Fir will be ok? I don't want to use any wood that...
1-20 of 21 Results
Top