LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Small Mahogany End Table

    I was fortunate enough to find a 8/4 board of mahogany when cleaning out a junk house. I've never bought mahogany before, but somehow I have been gifted boards of it a couple times in the last few years. Mostly I had used it for small projects like jewelry boxes and humidors, but with such thick...
  2. Projects Small Mahogany Humidor

    This is another humidor to add to my inventory as I prepare to launch an Etsy store. It's on the small side, interior space is around 9.5" x 6.5" x 2" I basically made it out of scrap and had just enough to make it after the bigger one I made already. It's also the first time I've used Brusso...
  3. Projects Mahogany Humidor

    This was my first time working with mahogany, and while I don't usually stain hard woods, I liked how this dark mahogany stain looked on it. The veneer I used for the lid is chestnut. Brusso hinges. I considered adding a catch or hardware knob, but decided I like the clean look without them. GF...
  4. Projects Keepsake box

    This is a keepsake box I made for a dear friend. it was surprise gift. It is made with purple heart, mahogany, and a walnut boarder around the top. Finger joints on the box. The top is checkerboard of the Purple Heart and mahogany with the walnut boarder. This is the first time I did...
  5. Projects Mahogany Shaker Side Table

    This project was something I started after finding a local Sash and Door Shop getting rid of a lot of kiln-dried mahogany cut-offs. So I picked up a truckload of cut offs and ventured down the road of making my first Mahogany project. There were a lot of "firsts" for me in this project. First...
  6. Mahogany Carved Twin Bed

    Ladies and gentlemen, This project was born somewhere at the local IKEA. I realized there that I wanted a simple and practical bed with the feel of beautiful real wood, chopped, carved, and finished myself. Here it is: Honduras mahogany - I didn't want to spend time working on a cheap...
  7. First attempt at a vase.

    This was my first attempt at turning a vase. I used some wood I found in a room at work so I'm not sure what the species is, but I think it may be mahogany from the look of it. After gluing up the wood I started turning it using a faceplate. Once I got it round I noticed a small knot near one...
  8. Underwater World

    Hello all, it's been awhile since I posted a project because of my broken hand and then playing catch up to get some projects done. This one took AWHILE to finish because it was 341 pieces and a lot of them where very small. I spent a lot of time down on my hands and knees looking for a piece...
  9. Arts & Crafts End Table

    These are two Arts and Crafts style end tables I built for our bedroom. They are made of Honduran Mahogany. Finish is brown mahogany Transtint dye in denatured alcohol followed by Seal-A-Coat by General Finishes and then multiple coats of GF Arm-R-Seal. Each table has 50 mortise and tenon...
  10. Cross section of the Avondster

    Hi, In addition to the making of the tenth scale model I was asked to also make a Cross section of the midship of it, Actually I started working on it before I was commissioned.I started on a one twenty scale. just for kicks, Seeing this they requested a one tenth scale to go with the model...
  11. mid-century style coffee table

    This was one of the first "real" projects I ever completed successfully. It's made of ribbon sapele finished with I think two coats of spray bombay mahogany polystain then a few coats of high gloss wipe on poly with light sanding between coats. Thanks for looking.
  12. Mahogany and tiger maple blanket/toy chest

    This project was the latest on the honey-do list. I built this as a toybox for my daughter Cecilia. The chest was built using African mahogany and tiger maple. I decided to put the new 1 1/2 hp motor in thew bandsaw to the test so I bookmatched all of the panels, including the top ands bottom. I...
  13. Hand made semi hollow longboard skateboard

    I make these semi hollow boards, they are hand shaped and built completely from scratch. The boards are designed to feel more like a surfboard than the bendy cruisers that are out there. The designs are all original and double as art and grip, whether barefoot or wearing shoes. hope you like!
  14. Clock curly maple and mahogany

    This is a clock I made some time ago it made out of curly maple and mahogany with a pendulum clock mach.
  15. Wine tasting, hors d'oeuvre tray

    These are also Christmas presents i have made this year for friends and family. Have you ever been at a tasting and glass in one hand and tray of goodies in the other and no place to put either down to enjoy one or the other. Saw some of these made of plastic and stole the idea. Woods are...
  16. Display case

    Made this case for a family friend for his dirk( a dagger used by Scotsman back in the day). The wood is all red oak with a mahogany stain. I routered a roman ogee to the lid, which came out ok I think. The inside is just styrofoam and material I got from Walmart and fit it to the dirk. I...
  17. Save the Children - Standup Paddleboard Paddle

    I still need to make the mounting brackets but other than that it's done. I've had a lot of good response on the websites that I've advertised the auction on so keep your fingers crossed. The auction is live on ebay. I listed it to start at $400 as suggested by eBay guru Dan...
  18. Round 3 Boxes

    After finishing my first box I knew that I wanted to make a bunch more. However, after I finished the second round, I ended up giving them all away as presents before I photographed them. These two are the next batch, the first with my new Ridgid r4510, replacing my Ryobi BTS12, and the...
1-20 of 500 Results
Top