LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 19 Results
  1. Fancy Cane #066: Ziricote, Bloodwood, Brazilian Ebony & Macawood

    This is a more formal style of cane with a slender handle and shaft that is still larger than most store bought canes but it is suitable for the small, medium and large hand. The handle is made from Ziricote and tapered to fit the palm comfortably. The collars are of Bloodwood and Brazilian...
  2. Edge grain cutting board number 1

    I just finished this for my niece and her husband who just bought a house in New York City. I made it from leftover pieces of Anigre, European beech, Bubinga, maple, paduck, yellowheart, walnut, Macawood,white oak. It measure's 12" x 18" x 1-3/4. I cut the sides at a 15 deg angle for a different...
  3. Cutting Board donation

    Donating this Cutting Board to be auctioned off to raise money to help kids with reading difficulties. It is 12×12 x1-5/8 thk and made from Shedua, Hard Maple, Bubinga, European Beech, Macawood, Black Walnut, and Marblewood. I sealed it with Salad Bowl finish and finished it with mineral...
  4. Cheeseboards

    I had some leftover wood from my last two CB's so I made two cheeseboards. The one on the left is made from Paduck, Black Walnut, Hard Maple, Yellowheart, Purpleheart, and Hickory. The handles are made from Purpleheart. It is 12 × 8×1-5/8 thk and sealed with salad bowl finish and finished with...
  5. Custom Tall Cane #144: Macawood, Black Walnut & Cherry [A Gobsmacker of a Cane]

    This is an extra tall, extra LARGE cane made for a client who is 6'4" tall. He originally purchased a cane of a similar shape but it was cut much too short for his stately stature, so I needed to convince him that I could make him a cane suitable for his needs. His original response to my...
  6. Quilt Cutting Board

    I had some scrap pieces of wood and decided to cut, plane, glue; repeat a few more times and this is what came out. It is 11" x 17" x 1-1/2 thk and made from Black Walnut, Sugar Maple, Shedua, Yellowheart, Macawood, Purpleheart, Paduck, Chestnut and Hickory. Thanks for viewing. -don
  7. Cutting Board Experiment

    I started out making a drunken CB but after the first few cutting and glue-ups I realized I never made a CB for my wife, so I wondered what an end grain CB would look like after having made some wave cut's on the bandsaw. Well this is it,. not what I was hopng for, but a nice CB just the same...
  8. Cutting board

    This CB is made from purpleheart, yellowheart, macawood, white limba, and hard maple. It measures 12×18 x 1-1/2 thk and sealed with salad bowl finish and finished with mineral oil/beeswax. The hard maple is from a find in a barn in New Hampshire. It was a pullout breadboard in a kitchen cabinet...
  9. Bar Cutting Board

    I just found out a friend of mine was just diagnosed with lymphoma. He just got done making a beautiful bar in his rec room, so I decided to make him a Cutting Board for the bar. I had some leftover pieces from my previous CB, so I quickly put together this CB. I have to admit, I was a little...
  10. Fancy Wood Canes

    Here is an assortment of three canes made of Black Walnut, Figured Cherry, Claro Black Walnut and Macawood. The handles are designed for a comfortable fit and the shaft is a thicker and sturdier one than found on most store bought canes. These are made to last a life time or two and to give...
  11. Cheese Board=Apple Pie=Church Fair

    A neighbor came over and asked if I would make her a Cheese Board for a wedding present. I know she is on a fixed income so I went to my scrap box and made this Cheese Board with Black Walnut, Sugar Maple, Paduck, Cherry, Macawood, Flaked Oak, White Limba, European Beech, Santos Mahogany and...
  12. Another Cutting Board from the scrap box

    After making the Cheese board from the scrap box, I decided to see if I could make a Cutting Board from scraps and this is it. It is 12×13 x 1-1/2 thk and made from : Shedua, Yellowheart, Flaked Oak, Black Locust, Purpleheart, Sugar Maple, Paduck, Macawood. I have four boxes of scrap pieces and...
  13. Turned Mallet for Swap 2014

    Here is my contribution to the Mallet Swap. I sent this one to Woodmaster1 in Indiana. The head is made from Macawood and the handle is White Oak. The head is a two piece lamination in which I cut a dovetail in each before gluing to hold the handle so there is no chance of the head flying off...
  14. Cheese/Bread board for fundraiser

    When I was recovering in the hospital from my heart procedure, I heard of a fundraiser they were having, so when I got home I took some pieces from the scrap box and put together two Cheese/Bread boards to donate for the fundraiser. First one is 7×13 and the second is 7-3/4×11 and made from...
  15. Off Topic Coffee Lounge
    Just wanted to find out if any of you have experienced any contact from anyone who is clearly not interested in our craft but obviously has some other nefarious purpose behind their contact. Today, someone named "Vivian" posted the below to my profile. Clearly I have no intention of contacting...
  16. Woodworking Skill Share
    I am attempting to stain a pine crib white. (pine to preserve the bites and bangs of a special infant) So I need a safe white stain and protective coating product. I tried white wash pickling from minwax on a test piece and it's simply not white enough, even after 4 coats. I'll tell the...
  17. Power Tools, Hardware and Accessories
    In response to http://lumberjocks.com/topics/27462 , I was blocked so I figured I'd just start a new forum topic… NiCd battery chargers like the ones Dewalt uses charge with a constant current, and detect end of charge by watching the cell voltage and stopping the charge when it droops slightly...
  18. Power Tools, Hardware and Accessories
    My friend bought a cabinet with hardwood doors with a series of round impressions that look like they were carved with a scooping tool. A few of us stood around looking at it discussing theories about how it could have been made in production with a machine but none sounded quite right. Does...
  19. Power Tools, Hardware and Accessories
    Hey folks today I was given a Moda Magnetics INC motor. The model # may be 60M-0236, I'm not sure. I want to use this motor for my new Beall buffing system, do you think this will work? Please point me in the right direction.
1-19 of 19 Results
Top