Search Results for ‘logo’

A couple of years ago I posted a Ford bandsaw box that I made for a co-worker that loved his truck. Today another co-worker is getting set to retire and he loves his GMC Sierra truck, so naturally I had to make him his own bandsaw box. I made a video of it and you can watch it here. There is a...

I was commissioned to build one of the finest sets of cornhole boards ever built. I began by carefully selecting 2×4s for grain and color. I milled these to about 1.5×1.5, and laminated into 12"-wide slabs, alternating reddish and whitish boards. This is both the widest I can run thru my...

Fire department logo I made for my brother's department. Its about 2 feet in diameter.

My first scroll saw project since shop class 35 years ago. About 25% the way through this project I was kicking myself. What was I thinking doing something with all these inside cuts for my first try at scrolling? Argh! It paid off though as I am happy with the project and my daughter...

Hi LJ! In this video I'll show how to make a gooseneck scraper from an old hand saw. I'm also explaining an effective method to etch metal by adding my logo into the scraper. As you already know, a gooseneck scraper are used on contourd surfaces to obtain a crisp result avoiding you sanding...

This is an attempt to express some of the beauty of Islamic Art , and to tackle calligraphy. It is made of Walnut with aluminium and brass inlays. The design was cut out partly by router and partly using a new scroll system I have developed The writing says EMIRATES and is the logo of the...

Well, this isn't exactly made of wood, but I thought it deserved posting here as my first carving, even if it was on a pumpkin. Just getting into the holiday spirit a little. Didn't spend much time in the shop this weekend but I did get to spend some time with my wife and daughter carving...

Box number 30 in my recent box series. This is number 13 in my Adventures into Shape. This box is an experiment built solely from plywood that I began in late June but set aside while making some commissioned pieces. Some of it was very successful and parts of it were a learning process. It is...

YES! What is in the box? It's an old wine bottle box from an old work colleague that I've repaired for a specific and special use! A CROWE CREATIONS hot stamp logo. For years I've signed and dated my toys ACC but never had my own logo. A fellow woodworker who did the graphic artwork for me...

So, I have been envious of Kerux's logo pens ever since his first post. I finally set about finding the decal paper and clear coat and time to try a few. My first prototype taught me a valuable lesson. "Clear" doesn't mean permeable, so the clear logo set onto unfinished stock is not going to...

Here are some mini corn hole boards. I custom cut the logo from vinyl. Still need to put a coat of poly on it for that great sliding effect, but they are mainly done. Check out the video on how I made these.

I have made this wooden logo for my buisness, so i can present my toys in a store in a different way than most. its all made on the scrollsaw, some sanding and paint. maybe some of you can use this idea? hope you like it :)

I've been making all of my boxes out of the same leftover flooring I found in the garage, and while it's fairly nice red oak it's nice to have a bit of variety. My background is mostly in textile arts, so the first thing that came to mind was using some sort of batik technique to pattern the...

Here is a table I found in a Popular Woodworking arts and crafts project book. Me and my two girls made it out of red oak. It's essentially four legs and two shelves. First you cut a dado in the long edge of four boards and then route to shape the legs with a template and a pattern bit. It was a...

My daughter really likes Skyrim - loves to watch the horse riding and dragons. I made her a shield based on the Riften Town Guard design. I cut the swords out with an exacto and glued them down, then spray lacquered over them. Started with a leather strap for the handle on the back, but that...

This customer wanted his beloved Harley logo carved next to his name, and wanted something different from the logs that anyone else had, so I searched the woods and found this Walnut that had come down in the creek after a flood. The logo and name are hand carved, painted, and sanded. All logs...

Hi Lumberjocks! This time I bring you another jewelry project (it's been some months since the last one). I wanted to share and show how I craft another type of stone inlay using solid wood (boxwood which it's really hard specie) and lapislazzuli (stone). Please, leave me a comment if you're...

I thought I'd do a "double duty" with this one-a sign for our picnic and a Summer Awards Project. I might try it again to see if I can do it better next time but until then, this will be adorning our backyard. Wood: cedar sign; walnut, pine, and something or other wood (stuff I had kicking...

Heavily spalted hackberry bowl 11.5" wide x 3.5" deep Finished with butcher block sealant (food grade oil/wax mix)

Black Walnut, with chainsaw carved name. 'clan' and their family logo 'God, Family, Country' were hand carved with a mallet and chisels. Protected with three coats of spar urethane. Sanded down to 220 grit prior to finish.