LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Jewelry Box

    Made out of walnut solids and Sapele veneer. Aprox. 15" x 15" x 9" deep. In the last picture is the recipient, my niece Anna.
  2. Pembroke table

    Made out of walnut with the secondary wood of poplar. Stringing and bell flowers done with holly. Drawer front is ribbon stripe mahogany and ambonya burl. Finish is Waterlox. Thanks for having look!
  3. Over Mantle carvings

    These carvings are 18' x 18" and are made out of Qt. sawn white oak. They are 1 3/4" in deep. I have worked evenings and weekends for the last two months to complete them. They are by far the hardest carvings I have had to make. The faces are the first ones I have ever tried to carve. I'm...
  4. Carved Vanity

    Here's a Quarter Sawn White Oak Vanity. The doors are linen fold carvings with touch latches. The lower center panel removes to get to the piumbing. The top portion was routed out and the diamonds were inserted after. The back ground was stippled by using a #2 nail set. The finish is dye stain...
  5. Walnut Ring Chest

    40" wide x 24" deep x 42' tall Walnut dye stained and top coated. They back ground of the drawer fronts is gold leaf. Walnut drawer box's with blumotion touch undermount slides. No pulls, give'm touch and they slide open on thier own. Granite top. Thanks for looking and have fun woodworking!
  6. Laundry Rm Folding Table

    The size of the table is 28" wide x 68" long x 36" tall. The base is made out of Alder with two hard maple dovetailed drawers on blumotiom soft close undermount slides. The top is made out of Hickory and is hand planed and distressed, there are hand turned Hickory pulls on the drawers. The legs...
  7. Bench Top Bench

    This bench started out as just a 2×12 and a 2×4. Then I decided it needed to be made out of something a little harder. I finally rounded up some white oak to make it out of. Somewhere in the process I decided to dovetail all the joints and champher all the edges. The tall vice was in Shopnotes...
  8. Baseball Bat Bed

    This is a full size bed made for my Grandson Knox. Its made out of walnut with used wooden baseball bats of various lenghts. Small bases were made to put on top of the footboard posts with baseballs on top of the head board posts. The walnut was bleached then dye stained and glazed. All the...
  9. Toboggan

    I was ask to make this for a Christmas display for the Wichita Historical Museum. Its 16" wide and 66" long. Made out of Quarter sawn Ash and English Brown Oak. The runners are bent laminations. They are made out of 8 pcs. each, 2 ash and 6 English brown oak. Used West Systems epoxy for all the...
  10. Packing Table/Jewelry lift Cabinet

    This cabinet serves two purposes. One side is a packing table for packing your suite cases. The other side is a jewerly lift cabinet. The cylinders outside diameter is 38 1/4", the lifting drumb is 36" in dia. x 18 5/8" tall. It features 28, 2" deep pull out trays and 2, 4" deep trays. All on...
  11. Bow Front Vanity

    Here's a double bow front vanity divided a flat bank of drawers. The radius is 30" diameter. Constructed out of hard maple with UV maple interiors. Under mount blum motion slides. Finish is paint and glaze and a top coat. Thanks for looking!
  12. Tilt Top Table

    Here's my version of an old classic. The top is 17" x 22" made out of spalted maple. The base is made using curly maple for the column and legs. the stringing on the legs is black died veneer. All the rest of the black accents is ebony. I also put spalted maple inserts on the feet. For the...
  13. Traveling Work Bench

    This is the bench that I posted a while back. I've had numerous request to do some traveling demonstrations, so I made this knock down stand to set the bench on. Its made out of white oak as well with waterlox as the finish. It breaks down into three pieces and can be easily loaded to hit the...
  14. Work Bench

    Here's my latest project a small expandable bench. It's made out if beech, wenge, holly, Red River gum burl, steel and aluminum. Closed it measures 3 1/2" x 11 1/2" x 22 3/4 long. Fully open it measures 11 1/2" wide x 12" tall x 38 3/4" long. The finish is Waterlox. There is not any plans. I...
  15. Great Hall Cabinets

    Here's two cabinets out of African Mahogany and Veneers. The lower doors are crotch mahogany the inlays on the cabinets include; curly satinwood, ebony, tulipwood and maple. There is a total of 21 pull out trays behind the lower doors. The galss doors have hand made restoration glass, there are...
  16. Coffee and Tea Bar

    This is a coffee and tea bar that will sit in the kitchen. Its constructed out of poplar and maple sheet goods. It has a painted and glazed finish. The three drawers are hung on self-closing blumotion undermount slides. The upper doors are pocket doors, but they are made to pocket without any...
  17. Massasser Ebony Vanity

    This is a bow front vanity with a 145" radius, 22" deep and 50" wide. The veneer is Massasser Ebony. Inlays on the front is 1/16 Maple. The champfer on the front legs is veneered with Birds Eye Maple. The top is book matched Birds Eye Maple with inlays of curly satinwood with a 1/32 ebony...
  18. Woodworking Skill Share
    I was introduced to them by Steve, who brought his bench to the recent swap meet at Anderson Plywood. It's a simple device, often on the outside end of a leg vise into which you can wedge the end of a variety of widths of board. The more you plane toward the board end (and this hook), the more...
  19. Blogs
    The floor is down Well I decided to bite the bullet and help out the local economy a little. Currently my shop is 24' x 38' with 8' ceilings. But my work space seams to keep getting smaller and smaller with every piece of equipment that I aquire. So my actual building or assembly area has...
  20. Blogs
    Carvings- Elevator wall, Kitchen, Over Mantle Here is some linen fold carvings for the house we've been working on for a while now. These get built into the elevator entrance wall. The general contractor is doing the wall, I just made the panels for them. The next two are for the over...
1-20 of 23 Results
Top