LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 109 Results
  1. Floating shelves and lit bottles

    I have build three floating shelves for in the office of a friend of mine. He ownes a video company and recently did a video shoot for a chemics company. He had some left over props and wanted to do something with it. So I build these shelves with led spots upside down in it. The bottles stand...
  2. LED Lamp Made from Red Cedar

    So I had a bunch of cedar logs that I had cut down into bowl blanks (I mostly do turning). I turned about as much as I could and decided to save the last few for something different. So I put them on the bandsaw and cut them down into small planks. trimmed them down a little on the tablesaw...
  3. Cabinets with BRAINS!

    Ok, so I will confess that this is probably the third project I did as a woodworker and recovering nerd. As an engineer, much to the dismay of my wife, I always look for things that need solving, even if it isn't a problem. This is one of those cases. So how often have you been fumbling in...
  4. Shotgun Shell Clock with LEDs and Sensor

    Here is my second shotgun shell clock. With this clock I added some bling. See the full build at my Instructables web page from start to finish. Basically I built a box so that I could enclose and hide all the electronics and the clock mechanism. There is a little woodburning included with...
  5. First Scroll Saw Project: Demon Light Box

    My first scroll saw project since shop class 35 years ago. About 25% the way through this project I was kicking myself. What was I thinking doing something with all these inside cuts for my first try at scrolling? Argh! It paid off though as I am happy with the project and my daughter...
  6. Zodiac Table

    Hello All, This is my first posting. And this is the first table I've ever made. I used maple plywood to make the legs and the border, I CNC machined the Zodiac carving into the 1" thick Plexiglass. Then I installed the red LED lights with a 9V battery and a switch to turn it on and off.
  7. Copy of Lamp by LJ Member Pashley

    I had been looking for a modern small lamp and after I saw LJ member Pashley's LED lamp and watching the video I new it would fit in with my cabinetry and furniture. I made mine using Teak for the walls and African Ebony Gaboon for the top and bottom. I held the strips of wood in place...
  8. Original design - Superman wooden doll lamp/nightlight

    This Christmas, I decide to make an interesting and playful wooden lamp/nightlight for our offices secret Santa game. I have found some designs that look similar, but most of them are using the Edison globe with a long tail of power cable. However, because the recipientant have a young kid at...
  9. Showtime! The Lighted Planetarium

    A joint project between the spousal unit and I for the weekends crafts fair. What it is: The wood work is a round, fumed red oak display stand with internal LED lights to enhance the glass artwork. The glass is a 10" diameter x 1/4" plate. The story My wife does fused glass artwork. One of...
  10. workbench light for dad's b-day!

    I made this with the leftover dowel I had from the desk lamp. Works with the t-track system. Happy Birthday DAD!
  11. Working light

    I am looking for a way to install battery powered LED lights for my house, as here in my city we have programmed blackouts from our electric company quite often, even two times a week, so today i found some parts lying around and decided to give it a try. I got the LED diode from a cheap...
  12. Built-in Wine Cabinet

    This is a built in wine cabinet I built for myself. On the other side of the wall is my kitchen. I have the cheap builders cabinets so I knocked a hole through into the unused space under the corner of my kitchen counter-top. I don't think the wall is load bearing but I elected to treat it as...
  13. LP Coffee Table

    I built this table as a gift for a friend's birthday. Simple MDF frame with plywood drawers and a wormy maple/glass top. I built a sort of shadowbox or recess under the top glass and put records in it. I got the idea from another project I saw on LumberJocks: I took it one step further and...
  14. We call them "Tumbleweed Lights"

    Here are a few of the "tumbleweed lights" I made to get ready for the holidays. These would make awesome centerpieces for Thanksgiving and Christmas as well as general ambiance. They are a set of battery powered LED lights running on AA batteries. The globe is simply a 4 inch glass Christmas...
  15. Hall Tree

    Honey-do complete. She wanted a Hall Tree for our coats, hats and and shoes.
  16. Glowing LED Resin River Table with Tutorial

    I made my first table! I've always loved resin river tables, and I've used epoxy resin for art and jewelry but never on this scale before. It turned out stunning.. plenty of imperfections but I still absolutely love it. I used East Coast Resin and a live edge walnut slab. I do electronics...
  17. DIY Barber Pole

    Made from PVC and paint, we needed a barber pole for our display at craft shows and art shows. The base and trim are made from scrap wood that I had in the shop. I even found a use in this for some left over cabinet trim that had been sitting around for years. The top is a standard light globe...
  18. Hand carved Wood/Resin hybrid cosplay wand with LED embedment

    Just finished (maybe 20 minutes ago) this hybrid wood/resin wand a friend commissioned from me for cosplay/larp. He is a big fan of resin work, and challenged me to build a "lightning wand" that would also light up. Unfortunatlly form me, my lathe is still not operational so this was all done...
1-20 of 109 Results
Top