Search Results for ‘leaves’

This was a commissioned project. This gun was the third and final part of a set of guns I did for a family in Wichita, Kansas. You can see the Quail Carving by clicking here You can see the Tom Turkey Carving by clicking here If you have a gunstock that you would like to have...

This cabinet has the sole purpose of storing table leaves (or boards). There are thirteen leaves here…they fit into a quarter sawn white oak extension table I also made. The drawer on top is to store things like table cloths and silverware. The wood is reclaimed wormy chestnut from a tobacco...

This is my first attempt at carving. This box is carved on five sides with vines and leaves. There are two distinct trunks that appear to grow from opposite corners across the sides and over the top. Inside the box is a tray depicting vines and leaves. On top of the tray carving is clear glass...

I had the chance and the honor to work on an authentic Charles Limbert dining table over the past few weeks. The table was 48 inches in diameter and had only one of its leaves remaining. At first, I was asked just to refinish the top and caulk paint the base. I wasn't commissioned to do any type...

The legendary Black Oak tree strikes again! A while back, I posted a picture of a box made from Black Oak that came from a tree that saved the life of a barn-storming pilot in Wisconsin. Since then, his relatives have had me make them two more boxes, as well as a number of crosses from lumber...

Cumaru Jewelry Box. The walnut box was a hit, and another client wanted something special for his best girl. so I made him one out of Cumaru (Brazilian Teak) with hickory splines, lines, and leaf veins. The box is approx. 12 by 8 inches and the tray and compartments are of hickory. The lining...

I was not sure about the pattern to start with but when applying the last coat of finish a friend came in and asked how much when I told them they brought it before the varnish had dried need I have worried. This measures 8" X 2" made from field maple sprayed with ebonising spray and the leaves...

Another example of my Cambridge pedestal dining table. This one is 42" x 96", expandable to 120". The top is solid 6/4 maple, stained a custom color to match the homes trim. The base is also solid maple and finished in a custom tinted waterborne poly to match the homes cabinets. The top...

Here is one of our Walden pedestal tables. This one is 40" x 84" with an additional 24" of leaves. The finish is General Finishes Enduro black poly topped with Target Coatings satin EM9300 with 5% cross-linker added.

I had seen design in the Workbench magazine last year. I decided it would be a great display area in my living room. I didn't do the cutting hubby did but I glued it together…lol (well it was hard to make sure it was all spaced). In the magazine they didn't do anything to the boards just real...

------------------------------------------- This walking cane has been "SOLD" and resides in Florence, Kansas USA ------------------------------------------- Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where...

I hand carved the leaves onto this cane while on a camping trip up north. I try to use found wood in my canes and walking sticks. With any luck the wood has been dead for some time, saving me the trouble of having to wait around for the wood to dry. This was a back alley find [some of the best...

One Maple leaf, & Two Oak leaves.

Cherry Leaf Box.... Repurposed cherry box with walnut splines and trim and decorative leaves. The lid is hinged with hidden pins and the front leaf serves as a lift and lid stop. The box measures 7.5×5 and has a small removable walnut tray with a cherry "handle". The leaves are each 3 pieces...

Nature is a constant source of inspiration for me. When I lived on the East Coast, the shapes, sizes, variety and colors of the multitude of trees amazed this girl from the West Coast. Fall became my favorite time of year and the motivation for this piece. I used Tiger maple, polyurethane, Watco...

Build Instructions and additional pictures: http://www.instructables.com/id/Rustic-Pumpkin-Lantern/ This triangular pumpkin lantern could be a nice addition to your Halloween décor. To give the lantern an aged timeworn look, the rustic finish uses multiple layers of paint, rough sanding and...

------------------------------------------- This walking cane has been "SOLD" and resides in LaBelle, Florida USA ------------------------------------------- Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where...

----------------------------------- This walking cane has been "SOLD" and resides in Phoenix, AZ USA ----------------------------------- Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll find a list of...

This one was more of a bear than a frog. When I made the pattern I did not realize how hard it was going to be to glue and assemble all of the pieces. There were so many pieces that each time you tried to check for a good fit or try to glue you would move other pieces everywhere. It has 241...

Finally finished a mantel for my wife, mantel was made out of walnut, carved 4 window(was aiming for old irish cottage windows, something that someone would be showing off that their grandfather's grandfather built the house and carved these windows kinda look). Attached to the back of the...