LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 29 Results
  1. Laundry Hanger

    Here's a quick little laundry hanger I made for my wife. I guess the cool thing is when it's not in use it can be knocked down to make more room for my tools:) It's nothing special but maybe a good beginner project that some of you could use and what a great way to use up some of that scrap...
  2. Laundry Caddy for Mom

    My mother asked me to build a laundry basket caddy for her, that would allow her to stack 2 baskets with minimal foot print. It has a cherry frame with wainscoting panels and formica laminated on top. The baskets slide in and out on cleats. I added the drawer for a surprise feature. I had...
  3. Bathroom/Laundry Room Cabinets

    I built these 2 cabinets a few years ago for my brothers. He just paid me for the materials. If I recall, they are oak plywood carcass and solid oak fronts with raised panel doors. Both feature fully adjustable shelves. Please excuse the mess on them. Thanks for looking.
  4. Laundry room makeover

    Custom cabinets using 1/2" plywood, poplar face frames and door frames. Mdf door faces. The countertop is maple from Ikea that I finished with arm-r-seal. Breadboard sheet and molding to finish.
  5. Laundry Room Reno

    In 2010, our basement flooded. This was the same year I was building my shop, so financial considerations dictated we had to choose which to complete that year. The shop won. Fast forward seven years, and it was finally time to tackle the basement. Seven years is a lot of time to think about...
  6. Bathroom vanity and matching laundry room cabinet

    We built our house back in 2012, but recently got around to completely finishing the basement. I decided to build a bathroom vanity and matching cabinet for the laundry room. Also, I decided to do the rest of the work in the bathroom as well (tile, floor, etc…) This was one of those projects...
  7. Laundry Drying Rack

    I recently built a drying rack for our laundry room. The frame is from 1×2 pre-primed stock. The back is leftover 1/4" paneling from a previous project. The rail section was drilled on a drill press to 3/8" depth and I believe the dowels are 3/8" set about 3" apart. The actual spacing was...
  8. hamper

    12×20 x 27" made of cherry. Grooves in the verticals. One hole in the horizontals for the dowels. Slats are about 1 1/8th inch wide and less than 1/8th inch thick. I wiped a coat of boiled linseed oil and then sprayed with poly.
  9. Laundry Basket Cabinet

    Just finished this for a good customer 94" x 30" x 20" deep. Holds 5 laundry baskets, pull out clothes rack, and pull out broom closet, white melamine
  10. Laundry Rack

    I was tired of looking at the boring laundry rack. It was the typical white aluminum rod on white aluminum brackets. I got to work on sketchup and this is what I came up with. First attempt at cutting bridle joints and miter joints by hand. 1. White oak 2. Mitered bridle joint on the corner 3...
  11. Laundry Cabinet with hidden hanger rod

    I built this laundry cabinet to match the cherry kitchen that is posted in my projects. The customer wanted to be able to hang damp clothes on a hanger but didn't want to see the hanger rod all the time. So I just made on end of the cabinet with no bottom and put the hanger rod inside. The...
  12. Washer and Dryer storage

    I decided my wife…er, umm, .. We, needed more room by the washer and dryer. Built out of construction grade 1×6 pine, wood glue, and dowels. Nothing fancy. Two coats of poly, not stain. I purposely picked out the grayed pine. Did a little seam with my router down the edges for character in the...
  13. Built-In Laundry Room Shelves

    My daughter wanted me to design and build her some laundry shelves. The shelves are 18.25 inches wide. I built the vertical wood wall and shelves in my home workshop, using Kreg pocket screws and glue to join up the pine boards. I built the shelve pieces in my home workshop, then transported...
  14. Washer/Dryer Cabinet with Litter Box Built-in

    Our washer and dryer stand in the back entryway, which is also our living room and adjoins our kitchen. They were very awkward and didn't fit with the house since we've done so much renovation. Originally I had wanted to build a mud room but I just couldn't make it fit with enough space...
  15. laundry rack

    Built this lumber rack a few years ago out of maple for a friend. It is made to hang on the laundry room wall and then extend out for holding drying clothes or items on hangers.
  16. Mudroom Cabinets For Mom

    After making something for the shop, my uncle and a coffee table for myself, my mother decided she should be next on the list (and after letting my father and I buy a shed, and about 20 power tools she deserved a reward). So we build her two cabinets for the mudroom/laundry room. They are...
  17. Laundry Room Folding Table

    This was for a customer I work with. She had a small laundry but did not have a folding table. She asked me to construct a built in station that encased the W/D. It has turned legs and attaches to the wall with cleats. I think it turned out great after she painted it. She was very happy and...
  18. A GENERAL purpose cart:-)

    As for many of us space is at a premium in my shop, and I am 'organizationally challenged' so I needed a place for the miscellany that doesn't fit in my big black tool box (its in the background of one picture). I also wanted a plaece for my planer, mite saw and compressor…oh yeah I also wanted...
  19. Laundry/Recycle/Trash Cabinet

    I installed this combination laundry, trash and recycle cabinet for a customer last month. The last picture shows what you saw when you entered the house from the garage which is most of the time, and they wanted something to hide the plumbing without redoing it and have the cabinet functional...
  20. Fold Down Laundry Rack

    My wife wanted me to put up a clothes line outside but needed a place to hang the delicates. She found a fold up drying rack that she liked and instead of purchasing, I built it with mostly scraps I had. Made with 1x Pine, 3/4" plywood, and 1/2" dowels.Some chain and eye bolts support the rack...
1-20 of 29 Results
Top