LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Journal Buffing wood and metal

    I have just finished up and shipped my project for the LJs 2022 knife swap. This was a first for me, as I’ve never made a knife before…well, I still haven’t, but I did make and assemble scales onto finished knife blanks. Maybe next year I’ll do my owm metal work, we’ll see... But that’s not the...
  2. Woodturning
    I've been turning for a few years and I'm ready to upgrade to a larger lathe I found a Vega 1446 for $700 I can't find any info on line on the lathe itself All of the information is based on the duplicator I've no interest in duplicating or even spindle turning Is thare someone who's...
  3. Projects Marble Padauk Bowl

    This 5x3” bowl is African Marble Padauk. This is not common coloring for this wood. Wood is also extremely oily. It took almost 50 coats. Had to remove finish 7 times due to finish not sticking to wood.
  4. Projects Oak bird

    I made this bird as a birthday present for my sister in law. The wood is oak and is harvested on the farm where she grew up, a long way from her current home. I thought that it will remind her of her roots and would be a cherished gift. The design is inspired from the Danish architect Kristian...
  5. Projects Central American Cocobolo ” Honey Pot.”

    This is one of my wife’s favorite bowls. It’s a 6”x4.5” Cocobolo ” Honey Pot.” Wood come from Central America and the pictures are not as good as seeing this one in person. Bowl is gorgeous!
  6. Projects South American Ziricote Bowl

    This is a 6x2” South American Ziricote bowl. Ziricote wood is extremely oily and it took a month to finish. This wood is extremely difficult to find and pricey. When I was shopping for this wood, The only wood sold was in lumber size or knife scales. A bowl blank found on EBay was 5x2” and they...
  7. Projects Granadillo Platter

    This is a 10x1” plate made from Central American Granadilla wood. The plate has 3 areas that look like someone fix a bad area in the wood with a patch, similar to how plywood has those patches that look like “eyes” on the bad side of plywood sheet.
  8. Projects East Asian Curly Lychee Platter

    This 6.5x1” platter is made from East Asian Curly Lychee. This also has Chatoyancy properties. The ripples on the bottom appear 3D but the bottom is completely flat..
  9. Projects Holiday nativity items

    I made a couple of Steve Good nativity item for the holidays. The first is a Nativity Illumniary. All the material is 1/4", I resawed a bunch of maple and poplar, cut to the correct size on the tablesaw. Each side is a different pattern so I stack cut 3 at a time, hence three boxes. The plans...
  10. Projects Christmas Bell Ornament

    Christmas Bell Ornament inspired by the work of Curt Fuller and Robin Costelle.
  11. Projects Saw till

    Been organizing my shop, and I no longer needed my old chisel till so I knocked out the existing rack within it, added a bar at the bottom and a board at the top, et voilá. Some day I’ll clean up those square corners and get a coat of oil on the new parts, but for now, my dovetail saws are off...
  12. Marketplace Classifieds
    Item Part Number Condition Record Lathe CLC3 Barely used Record Chisels CHS 6 Barely used Oneway Jumbo Jaws Chuck 2047 New in Box...
    $1,100 USD
  13. Curly Q

    This hollow form vase is turned from some gorgeous, highly figured, maple. It measures 9.5" tall by 4.5" wide. It is finished with Seal-A-Cell, 2 coats of Wipe-On Poly, and 4 coats of spray lacquer. I rubbed out the finish between coats with 0000 steel wool. I wish I had taken a picture of the...
  14. Euro-Style Pens

    What I did with my Sunday. Euro Style twist pens. The top row is walnut and maple in various designs - mostly I was trying different things with glue-ups. These are the designs I liked, the rest went in the burn barrel. The kits are inexpensive gun-metal models from Craft Supplies USA. I...
  15. Yet, another wooden Bowl

    Another wooden bowl ,made from scraps ! walnut,oak,and cherry. The bottom design came from another fellow lumberjock. thanks for lookin'
  16. Brett

    This hollow form vessel is turned from end grain, fiddle back maple. It measures approximately 6 inches tall by 5 inches wide. It is finished with aniline dyes and wipe-on poly. All comments and critiques are welcomed and appreciated.
  17. First attempt at a vase.

    This was my first attempt at turning a vase. I used some wood I found in a room at work so I'm not sure what the species is, but I think it may be mahogany from the look of it. After gluing up the wood I started turning it using a faceplate. Once I got it round I noticed a small knot near one...
  18. Windsor Legs, Posts -- Don't Give Up Hope!

    Well, since I've been running around the world, quite literally, haven't had much time to get back on the Windsor pony and get to my Boston side chairs. I did, however, get back into the shop over T-giving and finished up turning the legs and side posts for the two chairs I'm building to go...
  19. Walnut table

    Making custom pieces for family and friends is a real joy for me to do. I had the opportunity to make this table of my own design for my friends Jack and Mari. Jack was one of my professors in dental school, and we have remained colleagues and friends for over 35 years. The provenance for the...
1-20 of 500 Results
Top