LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 143 Results
  1. Projects Christmas Bell Ornament

    Christmas Bell Ornament inspired by the work of Curt Fuller and Robin Costelle.
  2. cherry and maple end tables

    i was planing some maple for another project and came across 1 board that was mineral stained that i really like. i saved it and built these 2 end tables to showcase it. i think it will stand out even more as the cherry ages. i didn't have any 2" cherry at the time, so the legs are a...
  3. Eastward Bench

    Completed a pair of these benches in July 1998. This is a Thos. Moser Eastward Bench. Follow this link to see how I did at duplicating Moser's design. My parents came for a month-long visit while I was stationed in Germany. I was only able to take two weeks off while they were with us and...
  4. Butcher-block Cornhole Boards, Epoxy top

    I was commissioned to build one of the finest sets of cornhole boards ever built. I began by carefully selecting 2×4s for grain and color. I milled these to about 1.5×1.5, and laminated into 12"-wide slabs, alternating reddish and whitish boards. This is both the widest I can run thru my...
  5. Sculpted Rocker

    Sculpted rocker made of Cherry. I know there are quite a few similar rockers posted using plans from Hal Taylor. Here's my shot at one. I used two sequential slabs of very wide cherry. (picture) The only thing I changed from the plan is the arm design. I made mine a little more round to suit...
  6. Very Basic Construction Lumber TV Stand From Douglas Fir 2X

    This was my first attempt at getting commissioned. I don't think I will do it again because I don't think the appreciation is out there for the amount of work it takes to build something like this. I know this for sure based on the low ball request that I must have been out of my mind to agree...
  7. cutting boards

    there are times when a gift with a personnal touch means so much more, that is how I started out on disigning and making cutting boards. All my cutting boards are jointed using hand tools and flatened in much the same way. if I get alot of tareout I'll use a random orbit sander for a final...
  8. The Strempel table (Out of the wood1)

    A hall table/occasional writing desk in African mahogany and spalted Cape Holly. 1420L x 560D x 835H I promised to post some photos of my accepted entries for the "Out of the wood" exhibition here in the Southern Cape, South Africa. This table is the most conservative in design of all my...
  9. Curved moldings for Senior Center

    We were brought in to make all of the curved parts - crown molding, panel molding, and curved S4S for the entertainment room at a local senior center. The first two pictures show the some of the curved crown in place, as well as some of the panels. Some of the panel moldings are compound...
  10. Sunset Tray - Scrap Wood Project -build video AlmFab

    Hey everyone, I just found out about this forum and am excited to share some projects. In this project, I go through my scrap bin and make a serving tray. With the variety of wood scraps I had on hand, I was able to create this sunset design going from dark earthy tones of walnut, rosewood...
  11. Pepper Mills!!! I'm outta control..somebody stop me...

    Christmas is on the way - yeah I know its 4 months away, but you know how things creep up on ya… I am postng a few of the mills recently completed which will be for the coming season, I do not sell much but need to be able to respond to requests for gifts from LOML and family, as well as...
  12. CARVED HORSES BOOK-END

    I'm posting this work with the tag " Carving" since this is one important kind of jobs used to make it. However, other works such as wood lamination, metal engraving and burin jobs are present. Maybe it is what you call a mixed media project. My intention was carving a stallion and a mare. After...
  13. Seed Box

    This is a box that my wife will store some garden seeds in. The main body and bottom panel is solid white Ash and the upper edge is inlaid with a 3 part, shop made banding (fir and sapele to be exact). The lid is made from Ash with a veneered panel which contains a 3 part marquetry leaf that...
  14. Contemporary Reclaimed Barn Wood Side Table

    This contemporary table was one I built for fun. It's made from a reclaimed white oak "door buck" (threshold) from a stack we have at the yard. It's 3" thick and 24"x24". The cube is a 24"x24"x24" steel frame I welded and then had chrome dipped. It's a very simple design. I like having all the...
  15. They keep coming.

    This one is made from antique yellow pine.. actually very old recycled hoop pine, with plantation hoop pine [new] and purple heart accent double chevrons. Third pic is part of the glue up prior to cutting the circle… And as a teaser some candle holders I made yesterday that I have to finish...
  16. Finished Journeyman´s piece

    Hey Guys, since you helped me with a Problem i had during the build of my Piece, i wanted to share the result with you guys and express my gratitude. My piece was originally designed as a Toolchest. Now i am not so sure anymore:) I used Ash and Walnut. The Panel i put it the Lid is also ash...
  17. Sofa table from tension wood

    This is a sofa table made from koa tension wood. For those who may not have yet experienced tension wood, it is from a tree growing in less than ideal conditions. For example, maybe it was on a hillside and as much as it wanted to grow tall and straight winds and erosion made this task...
  18. Glass Bottle Bird Feeder

    It's not an overly complex project and I do think that it really adds to the look of the yard. You will need some rot resistant wood (Cypress in this case) and a glass bottle. You should pick out the bottle ahead of time, as it will dictate the dimensions of the feeder. Ours was $1 at the local...
  19. Spalted Kudu

    This is a spalted pecan top with walnut veneer empire style. I used kudu horns for legs with silver tips.
  20. Woodworking Mallet, Thor-Style

    Woodworking mallet crafted for a friend. Multiple species of wood with several laminations. Canadian Hard Maple, Red Oak, and several exotic species make up this mallet.
1-20 of 143 Results
Top