LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 64 Results
  1. Knife Block

    Left over wood made into a christmas gift. Knife block is sized for three damascus steel knives while trying to preserve countertop space. Primarily made of walnut, and thin strip of ash in the middle. The base is primarily cherry, and the sides of the base were scraps from a cutting board...
  2. Spartan soldier knife block

    I found this interesting knife block online http://www.instructables.com/id/Knife-Block/ so I made one, didn't use the provided CAD drawing, created my own template http://rogerxue-eim.blogspot.com/2016/09/making-spartan-soldier-knife-block.html
  3. Composition 8, Kitchen Organizers

    Hi LJ, Getting around to posting some of my finished projects from this past school year for your viewing pleasure. This project was executed in a 3Dimensional Design course at Pratt Institute, and focused around creative phsycial products beginning with visual abstraction. Basically...
  4. Kitchen Knife Block

    My place is always a mess, and my father often complains about me and my brother leaving the knifes on the counter. He says someone could get hurt.. bla bla bla… but I never liked not having thinghs we use so many times stored away in the end o drawer. So the simple solution was to make a knife...
  5. A Knife Block that attracts !

    My daughter enjoys cooking so for a gift I bought her a decent set of kitchen knives with a standard knife block. I thought it would be nice to upgrade the block with this custom design , featuring the use of magnets hidden with in. I wanted to include the entire set so I had to come up...
  6. New Knife Block

    With limited drawer space I have always had to have a knife block. Had a fairly standard one on the counter but didn't like the amount of space it took up. My kitchen also has the old electrical panel (all wiring passes through it so I can't get rid of it) being all ugly on the wall. Came up...
  7. Kiridashi Pair with Block

    When I made a pair of Kiridashi knives for LJ KelleyCrafts in the recent knife swap, his wife tried to steal them. In haste to retain ownership, Dave told her not to worry, he'd get me to make her a pair of her own. Well, it took me about 3 months (and it cost Dave dearly in trade ;-P) but I...
  8. Knife block/Kitchen art.

    Full disclosure, I saw a picture of this knife block on Pinterest a while back and loved the look. I had no idea of how hard this would be to make if I wanted it to look good. I used Cardinal/Blood wood for the body with Maple for the accent pieces and some Bubinga for the center section...
  9. Knife blocks for already added knife projects

    Hi all, I made knives for each of my daughters for Christmas which I have already posted and had a small bit timber left over from each project so thought I would complete them with a single knife block each in the same timber as the scales. First pics are the Gidgee one, I inserted rare earth...
  10. My Knife Block

    Made from maple scraps I had been given, plus some cherry scraps used for legs. I have wanted to make one of these for quite sometime now, as a chef I couldn't stand having all of my knifes just tossed into a drawer, so here is the solution. I like the rear legs being tucked under a bit, it...
  11. My 2017 Knife Swap Submission

    This was my knife submission for the LJs 2017 Knife Swap. I wasn't really sure what would be appropriate for this swap. However after pondering it for a while, I thought it might be nice to have a dedicated knife to keep by the BBQ. So this is what I went about making. Having been sent some...
  12. First Knife Block

    I wasn't sure how to put together a variety of woods and get the knife slots to the right size, so I decided to make the block in layers. The outside is ambrosia maple, I then took four layers of sugar maple and glued it together. I dadoed the slots for the ziricote strips. I then cut pieces of...
  13. 3D Router Pantograph and Sign

    This is my new 3D pantograph courtesy of the plans created by Matthias. Looks complicated at first but the plans are well thought out and are explained very clearly. I built it in a weekend and works exactly as advertised. http://woodgears.ca/pantograph/ I also have pictures of a sign that...
  14. Guitar Head Knife Block

    I used maple and walnut wood to make this guitar head knife block. For a how to video and free plans for this project click on Video: Check out my YouTube channel Rosewood59 for more projects and free plans! Check out my Website Rosewood59 for more projects and free plans! Thank You For...
  15. Walnut Knife block

    Here is my walnut knife block I based on plans from Popular Woodworking. It's made from walnut my grandpa cut down and had milled. I finished it with a coat of boiled linseed oil and 3 coats of garnet shellac. After the shellac I wet sanded with 600 grit and then gave it a coat of wax. I used...
  16. My first set of knives and knife block

    This is a Wood Whisperer inspired knife Block with wooden skewers. The knife blanks are Katsura Damascus steel. 1st time making knife handles. Used a combination of cutlery rivets, pins and epoxy. Next time I will use just pins and epoxy. The cutlery rivets were a bit of a crutch for my 1...
  17. Walnut Knife Block

    This large Custom Knife Block is made from walnut with holly splines and accents. 11.5" x 11.5" x 13" . Weighs 26 LBS
  18. Knife Block

    Knife block as a wedding present for my nephew. I copied an existing block that I have as a design. Walnut with bloodwood accents. Finished with 4 coats of 100% tung oil. The knife handles are stabilized York gum burl (from spa city woodworks). I applied them onto Zhen damascus blades from...
  19. Simple Woodworking Projects For Gifts

    Last year I made a video about some simple gifts I made for my sister-in-law, and this year I wanted to double down and show you guys a few more. This time I made a few things for my wife for her birthday, and I gotta say, they were a hit. I created a knife block and a set of salad tongs using...
  20. Magnetic Knife Display

    A simple knife holder made from scraps. The center wood is padauk. The two outside pieces are oak stained with a black stain. I was trying to play off the knife handles with the wood choices. Went with and epoxy top coating for this one. More of an experiment. thanks for looking.
1-20 of 64 Results
Top