LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Steam Box

    This steam box was built using 1×8 cedar for the box and 1/2 birch dowels to suspend the wood being steamed. The steam generator is a propane fired turkey deep fryer. I added a water reservoir to replenish the deep fryer without removing the lid and the lid is held in place with spring clamps...
  2. Maple CD Shelves

    I made a few CD wall mount shelves and stackables. Nice projects, I have made about 12 of these so far, I have made a couple for my son and I am selling some. This is a nice gift for the person with too many CD's and not enough storage. I made them stackable so that you can add more as you go...
  3. Wooden lock

    I saw a lock similar to this one on adrianiredale's YouTube channel but you had to buy a book do this free version I got from Steve good
  4. Wood & Lumber
    I have some nice Oregon White Oak that has air dried for one year. It is now at about 15% moisture content. The lumber is planed down to about an inch, and I am ready to finish drying it to build a dining table. I stacked and stickered the lumber in a small insulated room, being careful to...
  5. Marketplace Classifieds
    I hope I am posting this in the right area… Is anyone interested in purchasing bulk quantities of kiln dried reclaimed hardwood? I have various species: ash, elm, red oak, white oak, hard maple, and a few others in smaller amounts. I can also do mixed pallets if you are in the mood for that as...
  6. Wood & Lumber
    Hello, We had a maple tree taken down 18 months ago. I had the trunk cut into 8 qtr slabs. They are roughly 60" long and 12"12 wide. They were kiln dried. They have been standing up in the garage for over a year, off the concrete. I have a planner but not a jointer. I created a sled from 1" MDF...
  7. Blogs
    Updated Lumber Rack Projects !! I have moved.. and moved a considerable amount of WOOD! I have updated my lumber rack projects with new photos of the current racks. My new shop is the entire basement, and to say its bigger than my last basement shop is an understatement. I have four times the...
  8. Blogs
    Inspiration I very much need to upgrade my current clamping solutions in the shop as my Jay Bates inspired Moxon Vise just isn't cutting it, I cant work on all face of the workpiece like you can on a traditional Woodworking Woodbench which currently isn't in the budget. I just wanted to say...
  9. Wood & Lumber
    For Sale: ~325 board feet of 4/4 quartersawn white oak. Kiln Dried and carefully handled. ~300 board feet at 12' lengths Widths range from 4" to 12-14" Located in the Allentown PA area. Please contact me by email at [email protected] $4.5/bdft for entire lot. ($1,400 negotiable) obo...
  10. Wood & Lumber
    Hey, gang, I sometimes see lumber in CL or other places - and sometimes at very competitive prices. Often the lumber has been air-dried. So beside being stickered and dried for a certain amount of time, what esle do I need to ask the seller? Can air dried be as good/better than kiln dried...
  11. Wood & Lumber
    Hi all, great place ya'll have here. With that being said, I searched the forum and found quiet a bit of info regarding moisture issues with self milled lumber. I am dealing with brutal humidity levels in central Ms. It's so bad you can almost see the water in the air…lol. 3 weeks ago I milled...
1-12 of 12 Results
Top